All MIBs › SWITCH-BRIDGE-MIB › switchBridgeTpFdbStatus
switchBridgeTpFdbStatus
Module: SWITCH-BRIDGE-MIB
OID (symbolic): SWITCH-BRIDGE-MIB::switchBridgeTpFdbStatus
OID (numeric): 1.3.6.1.4.1.207.8.9.2.2.5.4.3.1.3
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-only
Description: The status of this entry. The meanings of the values are:
other(1) : none of the following. This would include the case where some other MIB object (not the corresponding instance of switchBridgeTpFdbPort, nor an entry in the switchBridgeStaticTable) is being used to determine if and how frames addressed to the value of the corresponding instance of switchBridgeTpFdbAddress are being forwarded.
invalid(2) : this entry is not longer valid (e.g., it was learned but has since aged-out), but has not yet been flushed from the table.
learned(3) : the value of the corresponding instance of switchBridgeTpFdbPort was learned, and is being used.
self(4) : the value of the corresponding instance of switchBridgeTpFdbAddress represents one of the bridge's addresses. The corresponding instance of switchBridgeTpFdbPort indicates which of the bridge's ports has this address.
mgmt(5) : the value of the corresponding instance of switchBridgeTpFdbAddress is also the value of an existing instance of switchBridgeStaticAddress.
What is switchBridgeTpFdbStatus?
The status of this learned MAC address entry - other(1), invalid(2, stale but not yet flushed), learned(3, actively learned and in use), self(4, one of the bridge's own addresses), or mgmt(5, also present in the static table) - explaining why this address maps to its recorded port.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.207.8.9.2.2.5.4.3.1.3 snmpwalk -v2c -c public <target> SWITCH-BRIDGE-MIB::switchBridgeTpFdbStatus
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.207.8.9.2.2.5.4.3.1.3.1 snmpget -v2c -c public <target> SWITCH-BRIDGE-MIB::switchBridgeTpFdbStatus.1
Start monitoring vendor-specific managed Ethernet switch, multi-VLAN bridge instances (per-VLAN STP status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the SWITCH-BRIDGE-MIB::switchBridgeTpFdbStatus OID value, configure state conditions and alerts, and monitor any vendor-specific managed Ethernet switch, multi-VLAN bridge instances (per-VLAN STP status) from a single console.
OID Breakdown
Upper-level ancestors (11 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.207 | alliedTelesyn | AT-RG600-MIB |
| 1.3.6.1.4.1.207.8 | mibObject | AT-RG600-MIB |
| 1.3.6.1.4.1.207.8.9 | at8200SwitchMib | TELESYN-ATI-TC |
| 1.3.6.1.4.1.207.8.9.2 | switchMibModules | TELESYN-ATI-TC |
| 1.3.6.1.4.1.207.8.9.2.2 | bridgeModule | TELESYN-ATI-TC |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.207.8.9.2.2.5 | switchBridgeMib | SWITCH-BRIDGE-MIB |
| 1.3.6.1.4.1.207.8.9.2.2.5.4 | switchBridgeTp | SWITCH-BRIDGE-MIB |
| 1.3.6.1.4.1.207.8.9.2.2.5.4.3 | switchBridgeTpFdbTable | SWITCH-BRIDGE-MIB |
| 1.3.6.1.4.1.207.8.9.2.2.5.4.3.1 | switchBridgeTpFdbEntry | SWITCH-BRIDGE-MIB |
| 1.3.6.1.4.1.207.8.9.2.2.5.4.3.1.3 | switchBridgeTpFdbStatus | SWITCH-BRIDGE-MIB |