All MIBs › SWITCH-BRIDGE-MIB › switchBridgeStpPortState
switchBridgeStpPortState
Module: SWITCH-BRIDGE-MIB
OID (symbolic): SWITCH-BRIDGE-MIB::switchBridgeStpPortState
OID (numeric): 1.3.6.1.4.1.207.8.9.2.2.5.2.15.1.3
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-only
Description: The port's current state as defined by application of the Spanning Tree Protocol. This state controls what action a port takes on reception of a frame. If the bridge has detected a port that is malfunctioning it will place that port into the broken(6) state. For ports which are disabled (see switchBridgeStpPortEnable), this object will have a value of disabled(1).
What is switchBridgeStpPortState?
This port's current Spanning Tree state - disabled(1), blocking(2), listening(3), learning(4), forwarding(5), or broken(6) if the bridge has detected it malfunctioning - the field to check to see whether a port is actually passing traffic or held back by STP.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.207.8.9.2.2.5.2.15.1.3 snmpwalk -v2c -c public <target> SWITCH-BRIDGE-MIB::switchBridgeStpPortState
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.207.8.9.2.2.5.2.15.1.3.1 snmpget -v2c -c public <target> SWITCH-BRIDGE-MIB::switchBridgeStpPortState.1
Start monitoring vendor-specific managed Ethernet switch, multi-VLAN bridge instances (per-VLAN STP status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the SWITCH-BRIDGE-MIB::switchBridgeStpPortState OID value, configure state conditions and alerts, and monitor any vendor-specific managed Ethernet switch, multi-VLAN bridge instances (per-VLAN STP status) from a single console.
OID Breakdown
Upper-level ancestors (11 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.207 | alliedTelesyn | AT-RG600-MIB |
| 1.3.6.1.4.1.207.8 | mibObject | AT-RG600-MIB |
| 1.3.6.1.4.1.207.8.9 | at8200SwitchMib | TELESYN-ATI-TC |
| 1.3.6.1.4.1.207.8.9.2 | switchMibModules | TELESYN-ATI-TC |
| 1.3.6.1.4.1.207.8.9.2.2 | bridgeModule | TELESYN-ATI-TC |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.207.8.9.2.2.5 | switchBridgeMib | SWITCH-BRIDGE-MIB |
| 1.3.6.1.4.1.207.8.9.2.2.5.2 | switchBridgeStp | SWITCH-BRIDGE-MIB |
| 1.3.6.1.4.1.207.8.9.2.2.5.2.15 | switchBridgeStpPortTable | SWITCH-BRIDGE-MIB |
| 1.3.6.1.4.1.207.8.9.2.2.5.2.15.1 | switchBridgeStpPortEntry | SWITCH-BRIDGE-MIB |
| 1.3.6.1.4.1.207.8.9.2.2.5.2.15.1.3 | switchBridgeStpPortState | SWITCH-BRIDGE-MIB |