All MIBs › SWITCH-BRIDGE-MIB › switchBridgeStpForwardDelay
switchBridgeStpForwardDelay
Module: SWITCH-BRIDGE-MIB
OID (symbolic): SWITCH-BRIDGE-MIB::switchBridgeStpForwardDelay
OID (numeric): 1.3.6.1.4.1.207.8.9.2.2.5.2.1.1.11
Node type: OBJECT-TYPE
Type: Timeout
Access: read-only
Description: This time value, measured in units of hundredths of a second, controls how fast a port changes its spanning state when moving towards the Forwarding state. The value determines how long the port stays in each of the Listening and Learning states, which precede the Forwarding state. This value is also used, when a topology change has been detected and is underway, to age all dynamic entries in the Forwarding Database. [Note that this value is the one that this bridge is currently using, in contrast to switchBridgeStpBridgeForwardDelay which is the value that this bridge and all others would start using if/when this bridge were to become the root.]
What is switchBridgeStpForwardDelay?
The time, in hundredths of a second, this bridge currently uses for how long a port stays in Listening and Learning before reaching Forwarding, and for aging dynamic FDB entries during a topology change; distinct from switchBridgeStpBridgeForwardDelay, which is the value this bridge would advertise if it became root.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.207.8.9.2.2.5.2.1.1.11 snmpwalk -v2c -c public <target> SWITCH-BRIDGE-MIB::switchBridgeStpForwardDelay
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.207.8.9.2.2.5.2.1.1.11.1 snmpget -v2c -c public <target> SWITCH-BRIDGE-MIB::switchBridgeStpForwardDelay.1
Start monitoring vendor-specific managed Ethernet switch, multi-VLAN bridge instances (per-VLAN STP status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the SWITCH-BRIDGE-MIB::switchBridgeStpForwardDelay OID value, configure state conditions and alerts, and monitor any vendor-specific managed Ethernet switch, multi-VLAN bridge instances (per-VLAN STP status) from a single console.
OID Breakdown
Upper-level ancestors (11 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.207 | alliedTelesyn | AT-RG600-MIB |
| 1.3.6.1.4.1.207.8 | mibObject | AT-RG600-MIB |
| 1.3.6.1.4.1.207.8.9 | at8200SwitchMib | TELESYN-ATI-TC |
| 1.3.6.1.4.1.207.8.9.2 | switchMibModules | TELESYN-ATI-TC |
| 1.3.6.1.4.1.207.8.9.2.2 | bridgeModule | TELESYN-ATI-TC |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.207.8.9.2.2.5 | switchBridgeMib | SWITCH-BRIDGE-MIB |
| 1.3.6.1.4.1.207.8.9.2.2.5.2 | switchBridgeStp | SWITCH-BRIDGE-MIB |
| 1.3.6.1.4.1.207.8.9.2.2.5.2.1 | switchBridgeStpTable | SWITCH-BRIDGE-MIB |
| 1.3.6.1.4.1.207.8.9.2.2.5.2.1.1 | switchBridgeStpEntry | SWITCH-BRIDGE-MIB |
| 1.3.6.1.4.1.207.8.9.2.2.5.2.1.1.11 | switchBridgeStpForwardDelay | SWITCH-BRIDGE-MIB |