All MIBs › S5-ETHERNET-COMMON-MIB › s5EnPortPartStatus
s5EnPortPartStatus
Module: S5-ETHERNET-COMMON-MIB
OID (symbolic): S5-ETHERNET-COMMON-MIB::s5EnPortPartStatus
OID (numeric): 1.3.6.1.4.1.45.1.6.6.1.1.1.3
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: The partition status of the port. The following values can be written: enabled(2)..........enabled port partition(3)........partition port timedPartition(5)...time partition port (uses value from s5EnPortPartTime)
The following values reflect the partition status of the port: other(1).............partition status unknown enabled(2)...........port enabled partition(3).........port partitioned autoPartition(4).....port auto-partitioned by hardware timedPartition(5)....port is timed partitioned (see value of s5EnPortPartTime). On GETs with port status of timedPartition(5), if the time remaining before the partition is undone is available, it will be reported in object s5EnPortPartTime as a positive value. If not available, the value of s5EnPortPartTime will be zero. When changing a port to timedPartition(5), the SET request must also contain the value for object s5EnPortPartTime. Only value partition(3) will survive resets of the host card.
What is s5EnPortPartStatus?
Controls and reports this port's partition (isolation) state; an admin can write enabled(2) to bring it back online, partition(3) to isolate it manually, or timedPartition(5) to isolate it for a limited time (paired with s5EnPortPartTime), while autoPartition(4) shows the hardware isolated the port itself, typically after excessive collisions.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.45.1.6.6.1.1.1.3 snmpwalk -v2c -c public <target> S5-ETHERNET-COMMON-MIB::s5EnPortPartStatus
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.45.1.6.6.1.1.1.3.1 snmpget -v2c -c public <target> S5-ETHERNET-COMMON-MIB::s5EnPortPartStatus.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.45.1.6.6.1.1.1.3.1 i <value>
Start monitoring Avaya/Nortel BayStack Ethernet switches (shared per-port link/jabber/partition status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the S5-ETHERNET-COMMON-MIB::s5EnPortPartStatus OID value, configure state conditions and alerts, and monitor any Avaya/Nortel BayStack Ethernet switches (shared per-port link/jabber/partition status) from a single console.
OID Breakdown
Upper-level ancestors (11 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.45 | synoptics | CMU-MIB |
| 1.3.6.1.4.1.45.1 | products | SYNOPTICS-ROOT-MIB |
| 1.3.6.1.4.1.45.1.6 | series5000 | SYNOPTICS-ROOT-MIB |
| 1.3.6.1.4.1.45.1.6.6 | s5Eth | S5-ROOT-MIB |
| 1.3.6.1.4.1.45.1.6.6.1 | s5EnCfg | S5-ETHERNET-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.45.1.6.6.1.1 | s5EnPortTable | S5-ETHERNET-COMMON-MIB |
| 1.3.6.1.4.1.45.1.6.6.1.1.1 | s5EnPortEntry | S5-ETHERNET-COMMON-MIB |
| 1.3.6.1.4.1.45.1.6.6.1.1.1.3 | s5EnPortPartStatus | S5-ETHERNET-COMMON-MIB |