All MIBs › RFC1353-MIB › partyAuthPublic
partyAuthPublic
Module: RFC1353-MIB
OID (symbolic): RFC1353-MIB::partyAuthPublic
OID (numeric): 1.3.6.1.2.1.20.2.1.1.7
Node type: OBJECT-TYPE
Type: OCTET STRING
Access: read-write
Description: A publically-readable value for the party.
Depending on the party's authentication protocol, this value may be needed to support the party's authentication protocol. Alternatively, it may be used by a manager during the procedure for altering secret information about a party. (For example, by altering the value of an instance of this object in the same SNMP Set-Request used to update an instance of partyAuthPrivate, a subsequent Get-Request can determine if the Set- Request was successful in the event that no response to the Set-Request is received, see RFC 1352.)
The length of the value is dependent on the party's authentication protocol. If not used by the authentication protocol, it is recommended that agents support values of any length up to and including the length of the corresponding partyAuthPrivate object.
What is partyAuthPublic?
A publicly-readable value supporting this party's authentication protocol (up to 16 bytes for md5AuthProtocol); it can also be used by a manager during a key-change procedure -- by altering this object in the same Set-Request that updates the secret key, a later Get-Request can confirm whether the key change actually succeeded even if the original Set-Request's response was lost. Defaults to an empty string.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.2.1.20.2.1.1.7 snmpwalk -v2c -c public <target> RFC1353-MIB::partyAuthPublic
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.2.1.20.2.1.1.7.1 snmpget -v2c -c public <target> RFC1353-MIB::partyAuthPublic.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.2.1.20.2.1.1.7.1 s <value>
Start monitoring vendor-neutral, standards-based MIB, legacy SNMPv2p-capable network devices (obsolete security model) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the RFC1353-MIB::partyAuthPublic OID value, configure state conditions and alerts, and monitor any vendor-neutral, standards-based MIB, legacy SNMPv2p-capable network devices (obsolete security model) from a single console.
OID Breakdown
Upper-level ancestors (6 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.2 | mgmt | AXON-MIB |
| 1.3.6.1.2.1 | mib_2 | AXON-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.2.1.20 | snmpParties | RFC1353-MIB |
| 1.3.6.1.2.1.20.2 | partyPublic | RFC1353-MIB |
| 1.3.6.1.2.1.20.2.1 | partyTable | RFC1353-MIB |
| 1.3.6.1.2.1.20.2.1.1 | partyEntry | RFC1353-MIB |
| 1.3.6.1.2.1.20.2.1.1.7 | partyAuthPublic | RFC1353-MIB |