RDN-CABLE-TRAFFIC-MANAGEMENT-MIB :: rdnCtmClearHistory

MIB Reference — IPNetwork Monitor · Updated October 02, 2026

All MIBs › RDN-CABLE-TRAFFIC-MANAGEMENT-MIB › rdnCtmClearHistory

rdnCtmClearHistory

Module: RDN-CABLE-TRAFFIC-MANAGEMENT-MIB

OID (symbolic): RDN-CABLE-TRAFFIC-MANAGEMENT-MIB::rdnCtmClearHistory

OID (numeric): 1.3.6.1.4.1.4981.10.1.3

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-write

Description: This object is always read as the value noAction(1). Writing the value clear(2) clears the history of last enforcement for each monitored service flow as reported in the object rdnCtmEnforcedLast and the 'LastEnforced' column of the output of the CLI command 'show cable subscriber-usage'.

What is rdnCtmClearHistory?

Setting this object to clear(2) wipes the recorded history of the last enforcement event for every monitored service flow, as shown in rdnCtmEnforcedLast and the CLI's 'LastEnforced' column. Admins use this to reset reporting history, for example before starting a fresh billing cycle or after resolving a network-wide congestion event that triggered widespread enforcement. At the start of a new month, an admin might set rdnCtmClearHistory to clear(2) to reset the enforcement history so the new period's reports start clean.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.4981.10.1.3
snmpwalk -v2c -c public <target> RDN-CABLE-TRAFFIC-MANAGEMENT-MIB::rdnCtmClearHistory

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.4981.10.1.3.1
snmpget -v2c -c public <target> RDN-CABLE-TRAFFIC-MANAGEMENT-MIB::rdnCtmClearHistory.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.4981.10.1.3.1 i <value>

Start monitoring Motorola BSR CMTS (subscriber bandwidth/traffic policy enforcement) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the RDN-CABLE-TRAFFIC-MANAGEMENT-MIB::rdnCtmClearHistory OID value, configure state conditions and alerts, and monitor any Motorola BSR CMTS (subscriber bandwidth/traffic policy enforcement) from a single console.

OID Breakdown

Upper-level ancestors (7 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.4981riverdeltaRDN-MIB
Numeric OIDNameModule
1.3.6.1.4.1.4981.10rdnCableTrafficManagementMibRDN-CABLE-TRAFFIC-MANAGEMENT-MIB
1.3.6.1.4.1.4981.10.1rdnCtmScalarRDN-CABLE-TRAFFIC-MANAGEMENT-MIB
1.3.6.1.4.1.4981.10.1.3rdnCtmClearHistoryRDN-CABLE-TRAFFIC-MANAGEMENT-MIB