RC-IP-PIM-MIB :: rcIpPimIntfType

MIB Reference — IPNetwork Monitor · Updated September 12, 2026

All MIBsRC-IP-PIM-MIBrcIpPimIntfType

rcIpPimIntfType

Module: RC-IP-PIM-MIB

OID (symbolic): RC-IP-PIM-MIB::rcIpPimIntfType

OID (numeric): 1.3.6.1.4.1.2272.1.8.16.2.1.7

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-write

Description: Pim interface type.

What is rcIpPimIntfType?

Whether this PIM interface is active(1) (sends PIM Hello/protocol traffic) or passive(2) (participates in multicast forwarding without sending PIM control traffic), used on interfaces where you don't want to run PIM signaling with the far end.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.2272.1.8.16.2.1.7
snmpwalk -v2c -c public <target> RC-IP-PIM-MIB::rcIpPimIntfType

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.2272.1.8.16.2.1.7.1
snmpget -v2c -c public <target> RC-IP-PIM-MIB::rcIpPimIntfType.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.2272.1.8.16.2.1.7.1 i <value>

Start monitoring Bay Networks/Nortel Accelar/Passport switches (PIM multicast routing configuration) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the RC-IP-PIM-MIB::rcIpPimIntfType OID value, configure state conditions and alerts, and monitor any Bay Networks/Nortel Accelar/Passport switches (PIM multicast routing configuration) from a single console.

OID Breakdown

Upper-level ancestors (12 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.2272rapidCityRAPID-CITY
1.3.6.1.4.1.2272.1rcMgmtRAPID-CITY
1.3.6.1.4.1.2272.1.8rcIpRAPID-CITY
1.3.6.1.4.1.2272.1.8.16rcIpPimRAPID-CITY
1.3.6.1.4.1.2272.1.8.16.2rcIpPimTableRAPID-CITY
1.3.6.1.4.1.2272.1.8.16.2.1rcIpPimEntryRAPID-CITY
Numeric OIDNameModule
1.3.6.1.4.1.2272.1.8.16.2.1.7rcIpPimIntfTypeRC-IP-PIM-MIB