All MIBs › RC-IP-PIM-MIB › rcIpPimEnable
rcIpPimEnable
Module: RC-IP-PIM-MIB
OID (symbolic): RC-IP-PIM-MIB::rcIpPimEnable
OID (numeric): 1.3.6.1.4.1.2272.1.8.16.2.1.2
Node type: OBJECT-TYPE
Type: TruthValue
Access: read-write
Description: enable interface
What is rcIpPimEnable?
Enables or disables PIM on this specific interface; PIM must be both globally enabled (rcIpPimGlobalEnable) and enabled here for the interface to actually participate in multicast routing.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.2272.1.8.16.2.1.2 snmpwalk -v2c -c public <target> RC-IP-PIM-MIB::rcIpPimEnable
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.2272.1.8.16.2.1.2.1 snmpget -v2c -c public <target> RC-IP-PIM-MIB::rcIpPimEnable.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.2272.1.8.16.2.1.2.1 s <value>
Start monitoring Bay Networks/Nortel Accelar/Passport switches (PIM multicast routing configuration) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the RC-IP-PIM-MIB::rcIpPimEnable OID value, configure state conditions and alerts, and monitor any Bay Networks/Nortel Accelar/Passport switches (PIM multicast routing configuration) from a single console.
OID Breakdown
Upper-level ancestors (12 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.2272 | rapidCity | RAPID-CITY |
| 1.3.6.1.4.1.2272.1 | rcMgmt | RAPID-CITY |
| 1.3.6.1.4.1.2272.1.8 | rcIp | RAPID-CITY |
| 1.3.6.1.4.1.2272.1.8.16 | rcIpPim | RAPID-CITY |
| 1.3.6.1.4.1.2272.1.8.16.2 | rcIpPimTable | RAPID-CITY |
| 1.3.6.1.4.1.2272.1.8.16.2.1 | rcIpPimEntry | RAPID-CITY |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.2272.1.8.16.2.1.2 | rcIpPimEnable | RC-IP-PIM-MIB |