RC-IP-MIB :: rcIpBfdHoldOffTimerInterval

MIB Reference — IPNetwork Monitor · Updated September 12, 2026

All MIBsRC-IP-MIBrcIpBfdHoldOffTimerInterval

rcIpBfdHoldOffTimerInterval

Module: RC-IP-MIB

OID (symbolic): RC-IP-MIB::rcIpBfdHoldOffTimerInterval

OID (numeric): 1.3.6.1.4.1.2272.1.8.104.2

Node type: OBJECT-TYPE

Type: Unsigned32

Access: read-write

Description: This object specifies the hold off timer interval, in second. 0 means that hold off timer is disabled.

What is rcIpBfdHoldOffTimerInterval?

The BFD hold-off timer interval, in seconds, that delays reacting to a detected BFD failure; a value of 0 disables the hold-off delay.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.2272.1.8.104.2
snmpwalk -v2c -c public <target> RC-IP-MIB::rcIpBfdHoldOffTimerInterval

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.2272.1.8.104.2.1
snmpget -v2c -c public <target> RC-IP-MIB::rcIpBfdHoldOffTimerInterval.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.2272.1.8.104.2.1 i <value>

Start monitoring Bay Networks/Nortel Accelar (Rapid-City/Passport) Layer 3 switch (per-interface IP/routing-protocol configuration) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the RC-IP-MIB::rcIpBfdHoldOffTimerInterval OID value, configure state conditions and alerts, and monitor any Bay Networks/Nortel Accelar (Rapid-City/Passport) Layer 3 switch (per-interface IP/routing-protocol configuration) from a single console.

OID Breakdown

Upper-level ancestors (10 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.2272rapidCityRAPID-CITY
1.3.6.1.4.1.2272.1rcMgmtRAPID-CITY
1.3.6.1.4.1.2272.1.8rcIpRAPID-CITY
1.3.6.1.4.1.2272.1.8.104rcIpBfdRAPID-CITY
Numeric OIDNameModule
1.3.6.1.4.1.2272.1.8.104.2rcIpBfdHoldOffTimerIntervalRC-IP-MIB