All MIBs › RAPID-SYSTEM-CONFIG-MIB › rsAlarmLevel
rsAlarmLevel
Module: RAPID-SYSTEM-CONFIG-MIB
OID (symbolic): RAPID-SYSTEM-CONFIG-MIB::rsAlarmLevel
OID (numeric): 1.3.6.1.4.1.4355.2.4.4
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-only
Description: The level of an alarm generated.
What is rsAlarmLevel?
This object reports the severity level of the alarm as normal(4), warning(3), error(2), or critical(1). Admins use it to prioritize their response, escalating critical(1) alarms immediately while warning(3) alarms may only need routine review. For example, a trap carrying rsAlarmLevel critical(1) alongside rsAlarmMsg would demand immediate attention, unlike one at warning(3).
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.4355.2.4.4 snmpwalk -v2c -c public <target> RAPID-SYSTEM-CONFIG-MIB::rsAlarmLevel
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.4355.2.4.4.1 snmpget -v2c -c public <target> RAPID-SYSTEM-CONFIG-MIB::rsAlarmLevel.1
Start monitoring WatchGuard Firebox firewall/UTM appliance (system/interface configuration) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the RAPID-SYSTEM-CONFIG-MIB::rsAlarmLevel OID value, configure state conditions and alerts, and monitor any WatchGuard Firebox firewall/UTM appliance (system/interface configuration) from a single console.
OID Breakdown
Upper-level ancestors (7 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.4355 | rapidstream | RAPID-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.4355.2 | rsSystemConfigMIB | RAPID-SYSTEM-CONFIG-MIB |
| 1.3.6.1.4.1.4355.2.4 | rsSysTrapObjects | RAPID-SYSTEM-CONFIG-MIB |
| 1.3.6.1.4.1.4355.2.4.4 | rsAlarmLevel | RAPID-SYSTEM-CONFIG-MIB |