All MIBs › QUANTA-BGP-MIB › agentBGPDecProcPeer

agentBGPDecProcPeer

OID (symbolic): QUANTA-BGP-MIB::agentBGPDecProcPeer

OID (numeric): 1.3.6.1.4.1.7244.2.5.3.1.7

Node type: OBJECT-TYPE

Type: IpAddress

Access: read-only

Description: This variable is only valid when phase 1 is run for a single peer. In this case, this variable is the IP address of the peer for which phase 1 was run.

What is agentBGPDecProcPeer?

This is the IP address of the single peer that triggered phase 1 of the decision process for this entry; it is only meaningful when phase 1 ran for one specific peer rather than globally.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.7244.2.5.3.1.7
snmpwalk -v2c -c public <target> QUANTA-BGP-MIB::agentBGPDecProcPeer

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.7244.2.5.3.1.7.1
snmpget -v2c -c public <target> QUANTA-BGP-MIB::agentBGPDecProcPeer.1

Start monitoring Quanta/QCT white-box data-center switch (BGP routing configuration) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the QUANTA-BGP-MIB::agentBGPDecProcPeer OID value, configure state conditions and alerts, and monitor any Quanta/QCT white-box data-center switch (BGP routing configuration) from a single console.

OID Breakdown

Upper-level ancestors (8 from the standard OID tree / other modules)

Numeric OID	Name	Module
1	iso	LANART-AGENT
1.3	org	AirPair-MIB
1.3.6	dod	AirPair-MIB
1.3.6.1	internet	AirPair-MIB
1.3.6.1.4	private	AirPair-MIB
1.3.6.1.4.1	enterprises	AirPair-MIB
1.3.6.1.4.1.7244	quanta	QUANTA-SWITCH-MIB
1.3.6.1.4.1.7244.2	switch	QUANTA-SWITCH-MIB

Numeric OID	Name	Module
1.3.6.1.4.1.7244.2.5	quantaBGP	QUANTA-BGP-MIB
1.3.6.1.4.1.7244.2.5.3	agentBGPDecProcTable	QUANTA-BGP-MIB
1.3.6.1.4.1.7244.2.5.3.1	agentBGPDecProcEntry	QUANTA-BGP-MIB
1.3.6.1.4.1.7244.2.5.3.1.7	agentBGPDecProcPeer	QUANTA-BGP-MIB

QUANTA-BGP-MIB :: agentBGPDecProcPeer

agentBGPDecProcPeer

Module

This MIB depends on