All MIBs › Pulizzi › outlet1SequenceTime
outlet1SequenceTime
Module: Pulizzi
OID (symbolic): Pulizzi::outlet1SequenceTime
OID (numeric): 1.3.6.1.4.1.20677.1.5.1.1.3
Node type: OBJECT-TYPE
Type: Integer32
Access: read-write
What is outlet1SequenceTime?
Configures the sequence delay time (in the device's time units) for outlet 1 on this Pulizzi IPC3600 power controller, used to stagger when outlet 1 turns on relative to other outlets during a sequenced power-up.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.20677.1.5.1.1.3 snmpwalk -v2c -c public <target> Pulizzi::outlet1SequenceTime
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.20677.1.5.1.1.3.1 snmpget -v2c -c public <target> Pulizzi::outlet1SequenceTime.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.20677.1.5.1.1.3.1 i <value>
Start monitoring Pulizzi Engineering IPC-series switched power distribution units (PDUs) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the Pulizzi::outlet1SequenceTime OID value, configure state conditions and alerts, and monitor any Pulizzi Engineering IPC-series switched power distribution units (PDUs) from a single console.
OID Breakdown
Upper-level ancestors (7 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.20677 | pulizzi | EATON-EPDU-PU-MI-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.20677.1 | ipc3600 | Pulizzi |
| 1.3.6.1.4.1.20677.1.5 | outletMngt | Pulizzi |
| 1.3.6.1.4.1.20677.1.5.1 | outletConfig | Pulizzi |
| 1.3.6.1.4.1.20677.1.5.1.1 | outlet1 | Pulizzi |
| 1.3.6.1.4.1.20677.1.5.1.1.3 | outlet1SequenceTime | Pulizzi |