PowerConnect3248-MIB :: xstInstancePortState

MIB Reference — IPNetwork Monitor · Updated September 21, 2026

All MIBs › PowerConnect3248-MIB › xstInstancePortState

xstInstancePortState

Module: PowerConnect3248-MIB

OID (symbolic): PowerConnect3248-MIB::xstInstancePortState

OID (numeric): 1.3.6.1.4.1.674.10895.3.1.5.6.5.1.4

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-only

Description: The port's current state as defined by application of the Spanning Tree Protocol. This state controls what action a port takes on reception of a frame: discarding(1) Port receives configuration messages, but does not forward packets. learning(2) Port has transmitted configuration messages for an interval set by the Forward Delay parameter without receiving contradictory information. Port address table is cleared, and the port begins learning addresses. forwarding(3) Port forwards packets, and continues learning addresses.

For ports which are disabled (see xstInstancePortEnable), this object will have a value of discarding(1).

What is xstInstancePortState?

Reports this port's current Spanning Tree forwarding state for the instance: discarding(1) (receives BPDUs but doesn't forward data), learning(2) (building its address table but still not forwarding), or forwarding(3) (fully passing traffic); a disabled port always shows discarding(1).

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.674.10895.3.1.5.6.5.1.4
snmpwalk -v2c -c public <target> PowerConnect3248-MIB::xstInstancePortState

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.674.10895.3.1.5.6.5.1.4.1
snmpget -v2c -c public <target> PowerConnect3248-MIB::xstInstancePortState.1

Start monitoring Dell PowerConnect 3248 stackable Layer 2 Ethernet switch with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the PowerConnect3248-MIB::xstInstancePortState OID value, configure state conditions and alerts, and monitor any Dell PowerConnect 3248 stackable Layer 2 Ethernet switch from a single console.

OID Breakdown

Upper-level ancestors (8 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.674dellArrayManager-MIB
1.3.6.1.4.1.674.10895dellLanDell-Vendor-MIB
Numeric OIDNameModule
1.3.6.1.4.1.674.10895.3powerConnect3248MIBPowerConnect3248-MIB
1.3.6.1.4.1.674.10895.3.1powerConnect3248MIBObjectsPowerConnect3248-MIB
1.3.6.1.4.1.674.10895.3.1.5staMgtPowerConnect3248-MIB
1.3.6.1.4.1.674.10895.3.1.5.6xstMgtPowerConnect3248-MIB
1.3.6.1.4.1.674.10895.3.1.5.6.5xstInstancePortTablePowerConnect3248-MIB
1.3.6.1.4.1.674.10895.3.1.5.6.5.1xstInstancePortEntryPowerConnect3248-MIB
1.3.6.1.4.1.674.10895.3.1.5.6.5.1.4xstInstancePortStatePowerConnect3248-MIB