All MIBs › PowerConnect3248-MIB › xstInstancePortPriority
xstInstancePortPriority
Module: PowerConnect3248-MIB
OID (symbolic): PowerConnect3248-MIB::xstInstancePortPriority
OID (numeric): 1.3.6.1.4.1.674.10895.3.1.5.6.5.1.3
Node type: OBJECT-TYPE
Type: Integer32
Access: read-write
Description: Defines the priority used for this port in the Spanning Tree Algorithm. If the path cost for all ports on a switch is the same, the port with the highest priority (i.e., lowest value) will be configured as an active link in the Spanning Tree. This makes a port with higher priority less likely to be blocked if the Spanning Tree Algorithm is detecting network loops. Where more than one port is assigned the highest priority, the port with lowest numeric identifier will be enabled.
What is xstInstancePortPriority?
Sets this port's Spanning Tree priority (0-240) for the given instance; when multiple ports tie on path cost, the one with the highest priority (lowest numeric value) is chosen as the active link, and it also makes the port less likely to be blocked if a loop is detected.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.674.10895.3.1.5.6.5.1.3 snmpwalk -v2c -c public <target> PowerConnect3248-MIB::xstInstancePortPriority
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.674.10895.3.1.5.6.5.1.3.1 snmpget -v2c -c public <target> PowerConnect3248-MIB::xstInstancePortPriority.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.674.10895.3.1.5.6.5.1.3.1 i <value>
Start monitoring Dell PowerConnect 3248 stackable Layer 2 Ethernet switch with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the PowerConnect3248-MIB::xstInstancePortPriority OID value, configure state conditions and alerts, and monitor any Dell PowerConnect 3248 stackable Layer 2 Ethernet switch from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.674 | dell | ArrayManager-MIB |
| 1.3.6.1.4.1.674.10895 | dellLan | Dell-Vendor-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.674.10895.3 | powerConnect3248MIB | PowerConnect3248-MIB |
| 1.3.6.1.4.1.674.10895.3.1 | powerConnect3248MIBObjects | PowerConnect3248-MIB |
| 1.3.6.1.4.1.674.10895.3.1.5 | staMgt | PowerConnect3248-MIB |
| 1.3.6.1.4.1.674.10895.3.1.5.6 | xstMgt | PowerConnect3248-MIB |
| 1.3.6.1.4.1.674.10895.3.1.5.6.5 | xstInstancePortTable | PowerConnect3248-MIB |
| 1.3.6.1.4.1.674.10895.3.1.5.6.5.1 | xstInstancePortEntry | PowerConnect3248-MIB |
| 1.3.6.1.4.1.674.10895.3.1.5.6.5.1.3 | xstInstancePortPriority | PowerConnect3248-MIB |