All MIBs › PoE-MIB › swPoESystemStackingCtrlManagementMode
swPoESystemStackingCtrlManagementMode
Module: PoE-MIB
OID (symbolic): PoE-MIB::swPoESystemStackingCtrlManagementMode
OID (numeric): 1.3.6.1.4.1.171.12.24.1.11.1.4
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: This mode can be either power_limit mode or auto mode. power_limit: If power supplied to the port exceeds the power limit specified for it, this port will be shut down. auto: The system will automatically determine the PD class of the device connected to the port in the first stage. Normally, the PD can be classified as class 1, 2, or 3. If the PD can not be classified, it will be classified as class 0. For class 0, it will assume that the PD may consume the max power allowed. At the power feeding stage, if the power supplied to the port exceeds the upper limit of the detected PD class, this port will be shut down. For the upper limit for each class, it is 4W for class 1 PD class, 7W for class 2, and 15.4W for class 3 PD and class 0 PD.
What is swPoESystemStackingCtrlManagementMode?
The PoE management mode (power-limit or auto PD-class detection) for this specific unit within a stack, the per-unit counterpart of swPoESystemManagementMode.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.171.12.24.1.11.1.4 snmpwalk -v2c -c public <target> PoE-MIB::swPoESystemStackingCtrlManagementMode
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.171.12.24.1.11.1.4.1 snmpget -v2c -c public <target> PoE-MIB::swPoESystemStackingCtrlManagementMode.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.171.12.24.1.11.1.4.1 i <value>
Start monitoring D-Link managed switch (Power over Ethernet) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the PoE-MIB::swPoESystemStackingCtrlManagementMode OID value, configure state conditions and alerts, and monitor any D-Link managed switch (Power over Ethernet) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.171 | d_link | DE1500-MIB |
| 1.3.6.1.4.1.171.12 | dlink_common_mgmt | DLINK-ID-REC-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.171.12.24 | swPoEMIB | PoE-MIB |
| 1.3.6.1.4.1.171.12.24.1 | swPoESystemCtrl | PoE-MIB |
| 1.3.6.1.4.1.171.12.24.1.11 | swPoESystemStackingCtrlTable | PoE-MIB |
| 1.3.6.1.4.1.171.12.24.1.11.1 | swPoESystemStackingCtrlEntry | PoE-MIB |
| 1.3.6.1.4.1.171.12.24.1.11.1.4 | swPoESystemStackingCtrlManagementMode | PoE-MIB |