All MIBs › PoE-MIB › swPoESystemPowerLimit
swPoESystemPowerLimit
Module: PoE-MIB
OID (symbolic): PoE-MIB::swPoESystemPowerLimit
OID (numeric): 1.3.6.1.4.1.171.12.24.1.1
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: The power budget (in watts) of the PoE sytem. The default setting is 370 W.
What is swPoESystemPowerLimit?
The total power budget, in watts (37-370, default 370), that this switch's PoE controller will allocate across all powered ports; once total consumption approaches this ceiling, the disconnect method configured in swPoESystemPowerDisconnectMethod kicks in.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.171.12.24.1.1 snmpwalk -v2c -c public <target> PoE-MIB::swPoESystemPowerLimit
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.171.12.24.1.1.1 snmpget -v2c -c public <target> PoE-MIB::swPoESystemPowerLimit.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.171.12.24.1.1.1 i <value>
Start monitoring D-Link managed switch (Power over Ethernet) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the PoE-MIB::swPoESystemPowerLimit OID value, configure state conditions and alerts, and monitor any D-Link managed switch (Power over Ethernet) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.171 | d_link | DE1500-MIB |
| 1.3.6.1.4.1.171.12 | dlink_common_mgmt | DLINK-ID-REC-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.171.12.24 | swPoEMIB | PoE-MIB |
| 1.3.6.1.4.1.171.12.24.1 | swPoESystemCtrl | PoE-MIB |
| 1.3.6.1.4.1.171.12.24.1.1 | swPoESystemPowerLimit | PoE-MIB |