PoE-MIB :: swPoESystemInfoManagementMode

MIB Reference — IPNetwork Monitor · Updated October 02, 2026

All MIBs › PoE-MIB › swPoESystemInfoManagementMode

swPoESystemInfoManagementMode

Module: PoE-MIB

OID (symbolic): PoE-MIB::swPoESystemInfoManagementMode

OID (numeric): 1.3.6.1.4.1.171.12.24.2.1.1.6

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-only

Description: This mode can be either power_limit mode or auto mode. power_limit: If power supplied to the port exceeds the power limit specified for it, this port will be shut down. auto: The system will automatically determine the PD class of the device connected to the port in the first stage. Normally, the PD can be classified as class 1, 2, or 3. If the PD can not be classified, it will be classified as class 0. For class 0, it will assume that the PD may consume the max power allowed. At the power feeding stage, if the power supplied to the port exceeds the upper limit of the detected PD class, this port will be shut down. For the upper limit for each class, it is 4W for class 1 PD class, 7W for class 2, and 15.4W for class 3 PD and class 0 PD.

What is swPoESystemInfoManagementMode?

The PoE management mode (power-limit or auto PD-class detection) currently in effect on this system, the read-only reporting counterpart of swPoESystemManagementMode.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.171.12.24.2.1.1.6
snmpwalk -v2c -c public <target> PoE-MIB::swPoESystemInfoManagementMode

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.171.12.24.2.1.1.6.1
snmpget -v2c -c public <target> PoE-MIB::swPoESystemInfoManagementMode.1

Start monitoring D-Link managed switch (Power over Ethernet) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the PoE-MIB::swPoESystemInfoManagementMode OID value, configure state conditions and alerts, and monitor any D-Link managed switch (Power over Ethernet) from a single console.

OID Breakdown

Upper-level ancestors (8 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.171d_linkDE1500-MIB
1.3.6.1.4.1.171.12dlink_common_mgmtDLINK-ID-REC-MIB
Numeric OIDNameModule
1.3.6.1.4.1.171.12.24swPoEMIBPoE-MIB
1.3.6.1.4.1.171.12.24.2swPoESystemInfoPoE-MIB
1.3.6.1.4.1.171.12.24.2.1swPoESystemInfoTablePoE-MIB
1.3.6.1.4.1.171.12.24.2.1.1swPoESystemInfoEntryPoE-MIB
1.3.6.1.4.1.171.12.24.2.1.1.6swPoESystemInfoManagementModePoE-MIB