PoE-MIB :: swPoEPortCtrlState

MIB Reference — IPNetwork Monitor · Updated October 02, 2026

All MIBs › PoE-MIB › swPoEPortCtrlState

swPoEPortCtrlState

Module: PoE-MIB

OID (symbolic): PoE-MIB::swPoEPortCtrlState

OID (numeric): 1.3.6.1.4.1.171.12.24.3.1.1.2

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-write

Description: The PoE port state. Enables or disables the PoE function on the specific port. The default setting is enable.

What is swPoEPortCtrlState?

Enables or disables PoE power delivery on this specific port; default is enable(2), so a port that shouldn't power an attached device (e.g. a non-PD switch uplink) can be explicitly turned off here.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.171.12.24.3.1.1.2
snmpwalk -v2c -c public <target> PoE-MIB::swPoEPortCtrlState

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.171.12.24.3.1.1.2.1
snmpget -v2c -c public <target> PoE-MIB::swPoEPortCtrlState.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.171.12.24.3.1.1.2.1 i <value>

Start monitoring D-Link managed switch (Power over Ethernet) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the PoE-MIB::swPoEPortCtrlState OID value, configure state conditions and alerts, and monitor any D-Link managed switch (Power over Ethernet) from a single console.

OID Breakdown

Upper-level ancestors (8 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.171d_linkDE1500-MIB
1.3.6.1.4.1.171.12dlink_common_mgmtDLINK-ID-REC-MIB
Numeric OIDNameModule
1.3.6.1.4.1.171.12.24swPoEMIBPoE-MIB
1.3.6.1.4.1.171.12.24.3swPoEPortCtrlPoE-MIB
1.3.6.1.4.1.171.12.24.3.1swPoEPortCtrlTablePoE-MIB
1.3.6.1.4.1.171.12.24.3.1.1swPoEPortCtrlEntryPoE-MIB
1.3.6.1.4.1.171.12.24.3.1.1.2swPoEPortCtrlStatePoE-MIB