All MIBs › PHIHONG-PoE-MIB › poePortPowerPriority
poePortPowerPriority
Module: PHIHONG-PoE-MIB
OID (symbolic): PHIHONG-PoE-MIB::poePortPowerPriority
OID (numeric): 1.3.6.1.4.1.24852.2.3.1.10
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: Port Power Priority, show the priority of each port
What is poePortPowerPriority?
Sets this port's power priority (critical, high, or low) used when the overall PoE power budget is exceeded. Lower-priority ports are the first to have power cut if the system can't supply every connected device at once.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.24852.2.3.1.10 snmpwalk -v2c -c public <target> PHIHONG-PoE-MIB::poePortPowerPriority
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.24852.2.3.1.10.1 snmpget -v2c -c public <target> PHIHONG-PoE-MIB::poePortPowerPriority.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.24852.2.3.1.10.1 i <value>
Start monitoring Phihong PoE hub/switch/injector with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the PHIHONG-PoE-MIB::poePortPowerPriority OID value, configure state conditions and alerts, and monitor any Phihong PoE hub/switch/injector from a single console.
OID Breakdown
Upper-level ancestors (6 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.24852 | phihong | PHIHONG-PoE-MIB |
| 1.3.6.1.4.1.24852.2 | poeProduct | PHIHONG-PoE-MIB |
| 1.3.6.1.4.1.24852.2.3 | poePortTable | PHIHONG-PoE-MIB |
| 1.3.6.1.4.1.24852.2.3.1 | poePortEntry | PHIHONG-PoE-MIB |
| 1.3.6.1.4.1.24852.2.3.1.10 | poePortPowerPriority | PHIHONG-PoE-MIB |