MRV-IR-HDAM-MIB :: irAlarmContactFaultState

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsMRV-IR-HDAM-MIBirAlarmContactFaultState

irAlarmContactFaultState

Module: MRV-IR-HDAM-MIB

OID (symbolic): MRV-IR-HDAM-MIB::irAlarmContactFaultState

OID (numeric): 1.3.6.1.4.1.33.100.4.2.1.1.6

Node type: OBJECT-TYPE

Type: IrContactState

Access: read-write

Description: The contact state (open or closed) which indicates the fault condition. If the value of this object and irAlarmContactState is the same, then the alarm has been triggered.

What is irAlarmContactFaultState?

This is the contact state (open or closed) that admins define as representing a fault condition for this alarm; the alarm is considered triggered when irAlarmContactState matches this configured value. Admins set this based on how the external sensor is wired, since some devices report a fault as open and others as closed.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.33.100.4.2.1.1.6
snmpwalk -v2c -c public <target> MRV-IR-HDAM-MIB::irAlarmContactFaultState

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.33.100.4.2.1.1.6.1
snmpget -v2c -c public <target> MRV-IR-HDAM-MIB::irAlarmContactFaultState.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.33.100.4.2.1.1.6.1 s <value>

Start monitoring MRV In-Reach LX HDAM expansion module with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the MRV-IR-HDAM-MIB::irAlarmContactFaultState OID value, configure state conditions and alerts, and monitor any MRV In-Reach LX HDAM expansion module from a single console.

OID Breakdown

Upper-level ancestors (7 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.33iTouchITOUCH-MIB
Numeric OIDNameModule
1.3.6.1.4.1.33.100mrvLxMRV-IR-HDAM-MIB
1.3.6.1.4.1.33.100.4irHdamMibMRV-IR-HDAM-MIB
1.3.6.1.4.1.33.100.4.2irHdamAlarmMRV-IR-HDAM-MIB
1.3.6.1.4.1.33.100.4.2.1irAlarmConfigTableMRV-IR-HDAM-MIB
1.3.6.1.4.1.33.100.4.2.1.1irAlarmConfigEntryMRV-IR-HDAM-MIB
1.3.6.1.4.1.33.100.4.2.1.1.6irAlarmContactFaultStateMRV-IR-HDAM-MIB