All MIBs › LOG-MIB › logCurrentClear
logCurrentClear
Module: LOG-MIB
OID (symbolic): LOG-MIB::logCurrentClear
OID (numeric): 1.3.6.1.4.1.1038.105.101
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: When a set command is issued on this variable the entire log event is cleared.
This command is optional
What is logCurrentClear?
Setting this object to setToClear(0) clears the current-alarms log (as opposed to the full historical log cleared by logClear). Admins use it to reset the active-alarm table, for example after confirming all listed alarms have been resolved.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.1038.105.101 snmpwalk -v2c -c public <target> LOG-MIB::logCurrentClear
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.1038.105.101.1 snmpget -v2c -c public <target> LOG-MIB::logCurrentClear.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.1038.105.101.1 i <value>
SNMPv3 example:
snmpget -v3 -l authPriv -u snmpv3-user -a SHA -A "AuthPassword1" -x AES -X "PrivPassword1" <target> logCurrentClear.1
Start monitoring SAGEM telecom/network equipment (alarm/event log) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the LOG-MIB::logCurrentClear OID value, configure state conditions and alerts, and monitor any SAGEM telecom/network equipment (alarm/event log) from a single console.
OID Breakdown
Upper-level ancestors (7 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.1038 | sagemDr | SAGEM-DR-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.1038.105 | log | LOG-MIB |
| 1.3.6.1.4.1.1038.105.101 | logCurrentClear | LOG-MIB |