All MIBs › LJ4300mfp-MIB › scan_calibration_error
scan_calibration_error
Module: LJ4300mfp-MIB
OID (symbolic): LJ4300mfp-MIB::scan_calibration_error
OID (numeric): 1.3.6.1.4.1.11.2.3.9.4.2.1.2.2.2.6
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-only
Description: Error status of the most recent calibration session. eNoError(1) - The calibation was successful. eUnknownCalibrationError(2) - An unknown error occurred. eScannerFeederEmpty(3) - The feeder contained nothing to scan. eLowMemory(4) - Insufficient memory available to complete the calibration. eWriteFailed(5) - Write to NVRAM failure. eScannerBusy(6) - Scanner is busy. Detailed information about the cause and remedy for each error should be documented in the device POS. Additional information: Error status of the most recent calibration session. Only eNoError, eScannerBusy, and eUncorrectablePixels will be supported. The device will use eScannerBusy to indicate the calibration request occurred during a time that the device was not ready to perform calibration. The device will use eUncorrectablePixels to indicate that at least one pixel was not correctable on at least one of scanning sensors in the device (ADF or flatbed).
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.11.2.3.9.4.2.1.2.2.2.6 snmpwalk -v2c -c public <target> LJ4300mfp-MIB::scan_calibration_error
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.11.2.3.9.4.2.1.2.2.2.6.1 snmpget -v2c -c public <target> LJ4300mfp-MIB::scan_calibration_error.1
Start monitoring HP LaserJet 4300 MFP multifunction device with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the LJ4300mfp-MIB::scan_calibration_error OID value, configure state conditions and alerts, and monitor any HP LaserJet 4300 MFP multifunction device from a single console.
OID Breakdown
Upper-level ancestors (16 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.11 | hp | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2 | nm | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2.3 | hpsystem | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2.3.9 | net_peripheral | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2.3.9.4 | netdm | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2.3.9.4.2 | dm | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2.3.9.4.2.1 | device | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.2 | source_subsystem | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.2.2 | scanner | IJ8060-MIB |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.2.2.2 | status_scanner | LJ1220-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.11.2.3.9.4.2.1.2.2.2.6 | scan_calibration_error | LJ4300mfp-MIB |