All MIBs › LJ3200-MIB › scan_calibration_target
scan_calibration_target
Module: LJ3200-MIB
OID (symbolic): LJ3200-MIB::scan_calibration_target
OID (numeric): 1.3.6.1.4.1.11.2.3.9.4.2.1.2.2.1.32.18
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-only
Description: This object is used by the host to check which type of calibration this scan device supports. The device pos will describe the meaning and intent of each type of scan calibration supported. Additional information: This object is used by the host to check which type of calibration the firmware supports. This is in anticipation of the fact that the initial release of HP Laserjet 3200 will be calibrated off of a sheet, but the 'Rest of World' release will be calibrated off of the platen.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.11.2.3.9.4.2.1.2.2.1.32.18 snmpwalk -v2c -c public <target> LJ3200-MIB::scan_calibration_target
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.11.2.3.9.4.2.1.2.2.1.32.18.1 snmpget -v2c -c public <target> LJ3200-MIB::scan_calibration_target.1
Start monitoring HP LaserJet printers with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the LJ3200-MIB::scan_calibration_target OID value, configure state conditions and alerts, and monitor any HP LaserJet printers from a single console.
OID Breakdown
Upper-level ancestors (17 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.11 | hp | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2 | nm | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2.3 | hpsystem | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2.3.9 | net_peripheral | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2.3.9.4 | netdm | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2.3.9.4.2 | dm | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2.3.9.4.2.1 | device | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.2 | source_subsystem | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.2.2 | scanner | IJ8060-MIB |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.2.2.1 | settings_scanner | IJ8060-MIB |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.2.2.1.32 | scan_calibration | LJ1220-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.11.2.3.9.4.2.1.2.2.1.32.18 | scan_calibration_target | LJ3200-MIB |