All MIBs › LJ3200-MIB › device_cfg_upload
device_cfg_upload
Module: LJ3200-MIB
OID (symbolic): LJ3200-MIB::device_cfg_upload
OID (numeric): 1.3.6.1.4.1.11.2.3.9.4.2.1.1.1.13
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: Handshaking mechanism between host and device to coordinate the upload of device specific data. eCfgUploadIdle - indicates device configuration upload activity is not occurring. Device powers up in this state but will otherwise never transition to this state. This state is host settable from eCfgUploadActive, eCfgUploadDone, and eCfgUploadAborted. Host setting to eCfgUploadIdle while object is in eCfgUploadActive will cause the upload activity to be prematurely terminated. Host setting to this state resets the object allowing a new upload to be initiated. eCfgUploadStart - indicates host wishes to commence a device configuration upload activity. This state is only host settable from eCfgUploadIdle. Only the device can transition this object from this state to eCfgUploadActive or eCfgUploadAborted. Device will not set to this state. eCfgUploadActive - indicates upload activity is in progress. Device transitions object to this state only from eCfgUploadStart, to signal data upload can commence. The device can transition from this state to eCfgUploadDone or eCfgUploadAborted. The host can transition from this state to eCfgUploadIdle. This state is not host settable. eCfgUploadAborted - indicates the upload activity was terminated by the device. Only the device can set to this state from eCfgUploadStart or eCfgUploadActive. Only the host can transition from this state to eCfgUploadIdle. This state is not host settable. eCfgUploadDone - indicates device completely transmitted the upload data. Device transitions to this state only from eCfgUploadActive. Only the host can transition from this state to eCfgUploadIdle. This state is not host settable.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.11.2.3.9.4.2.1.1.1.13 snmpwalk -v2c -c public <target> LJ3200-MIB::device_cfg_upload
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.11.2.3.9.4.2.1.1.1.13.1 snmpget -v2c -c public <target> LJ3200-MIB::device_cfg_upload.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.11.2.3.9.4.2.1.1.1.13.1 i <value>
Start monitoring HP LaserJet printers with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the LJ3200-MIB::device_cfg_upload OID value, configure state conditions and alerts, and monitor any HP LaserJet printers from a single console.
OID Breakdown
Upper-level ancestors (15 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.11 | hp | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2 | nm | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2.3 | hpsystem | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2.3.9 | net_peripheral | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2.3.9.4 | netdm | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2.3.9.4.2 | dm | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2.3.9.4.2.1 | device | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1 | system | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.1 | settings_system | CLJ8500-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.1.13 | device_cfg_upload | LJ3200-MIB |