All MIBs › LJ1220-MIB › scan_calibration_error
scan_calibration_error
Module: LJ1220-MIB
OID (symbolic): LJ1220-MIB::scan_calibration_error
OID (numeric): 1.3.6.1.4.1.11.2.3.9.4.2.1.2.2.2.6
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-only
Description: Error status of the most recent calibration session. eNoError(1) - The calibation was successful. eUnknownCalibrationError(2) - An unknown error occurred. eScannerFeederEmpty(3) - The feeder contained nothing to scan. eLowMemory(4) - Insufficient memory available to complete the calibration. eWriteFailed(5) - Write to NVRAM failure. eScannerBusy(6) - Scanner is busy. Detailed information about the cause and remedy for each error should be documented in the device POS. Additional information: This object was originally defined for use on Timberline. We are proposing the new enums number 7-9. Note: Option 9 would only be set during a factory calibration to indicate that at least one pixel was not correctable by the digital calibration factors.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.11.2.3.9.4.2.1.2.2.2.6 snmpwalk -v2c -c public <target> LJ1220-MIB::scan_calibration_error
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.11.2.3.9.4.2.1.2.2.2.6.1 snmpget -v2c -c public <target> LJ1220-MIB::scan_calibration_error.1
Start monitoring HP LaserJet 1220 multifunction printer with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the LJ1220-MIB::scan_calibration_error OID value, configure state conditions and alerts, and monitor any HP LaserJet 1220 multifunction printer from a single console.
OID Breakdown
Upper-level ancestors (15 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.11 | hp | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2 | nm | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2.3 | hpsystem | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2.3.9 | net_peripheral | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2.3.9.4 | netdm | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2.3.9.4.2 | dm | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2.3.9.4.2.1 | device | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.2 | source_subsystem | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.2.2 | scanner | IJ8060-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.11.2.3.9.4.2.1.2.2.2 | status_scanner | LJ1220-MIB |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.2.2.2.6 | scan_calibration_error | LJ1220-MIB |