All MIBs › LJ1220-MIB › scan_calibration_download
scan_calibration_download
Module: LJ1220-MIB
OID (symbolic): LJ1220-MIB::scan_calibration_download
OID (numeric): 1.3.6.1.4.1.11.2.3.9.4.2.1.2.2.2.5
Node type: OBJECT-TYPE
Type: OCTET STRING
Access: read-write
Description: Returns or changes the state of the calibration operation. cScanCalibrationIdle - indicates that calibration is not in progress. cScanCalibrationStart - This state is set by host to request calibration initiation. Device should not set to this state. cScanCalibrationActive - Indicates device is in calibration mode. Device sets cScanCalibrationActive to signal calibration is in process. cScanCalibrationAborted - Set by device to indicate calibration was prematurely terminated. Set by host when a calibration error occurs. cScanCalibrationSendDataRequest - Set by host when host wants to send data to the device. cScanCalibrationSendDataRequestOK - Set by the device to tell the host that the device is ready to accept data. cScanCalibrationSendDataRequestDone -Set by the device to indicate the data was received by the device. cScanCalibrationRequestScanBuffer - Set by the host to request a buffer from the device. cScanCalibrationDone - Set by the host to inform the device calibration is complete. The sequence of bits being set and the restrictions for setting bits should be documented in the device POS. Additional information: This object was originally defined for use on Timberline. For Tahiti/Sockeye we will not be using values 3-6 and 7. These are no longer applicable since the calibration is completely contained within firmware.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.11.2.3.9.4.2.1.2.2.2.5 snmpwalk -v2c -c public <target> LJ1220-MIB::scan_calibration_download
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.11.2.3.9.4.2.1.2.2.2.5.1 snmpget -v2c -c public <target> LJ1220-MIB::scan_calibration_download.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.11.2.3.9.4.2.1.2.2.2.5.1 s <value>
Start monitoring HP LaserJet 1220 multifunction printer with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the LJ1220-MIB::scan_calibration_download OID value, configure state conditions and alerts, and monitor any HP LaserJet 1220 multifunction printer from a single console.
OID Breakdown
Upper-level ancestors (15 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.11 | hp | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2 | nm | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2.3 | hpsystem | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2.3.9 | net_peripheral | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2.3.9.4 | netdm | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2.3.9.4.2 | dm | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2.3.9.4.2.1 | device | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.2 | source_subsystem | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.2.2 | scanner | IJ8060-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.11.2.3.9.4.2.1.2.2.2 | status_scanner | LJ1220-MIB |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.2.2.2.5 | scan_calibration_download | LJ1220-MIB |