Description: When set this object will cause the separation setting of the device to be changed to the nearest appropriate value. When the object is read it will return the current separation setting. Each engine will have different supported values. The object should snap to the nearest supported value. Different products could use this value in different ways. Typically, this value would be a voltage in an EP system, but could be some other parameter on an inkjet. The device POS will specify supported values, any snap behavior and will detail the product specific meaning of 'device separation'. Additional information: This object changes the charge so the media does not curl too much causing the media to jam under the cartridge. Any value >= 150 snaps to 200.