All MIBs › L2PROTOCOL-TUNNEL-MIB › swL2PTProtocol
swL2PTProtocol
Module: L2PROTOCOL-TUNNEL-MIB
OID (symbolic): L2PROTOCOL-TUNNEL-MIB::swL2PTProtocol
OID (numeric): 1.3.6.1.4.1.171.12.93.1.2.1.3
Node type: OBJECT-TYPE
Type: Bits
Access: read-write
Description: This object indicates the tunneled protocols on this port. This object can only be applied on a UNI port.
If the 'stp' BIT is set, the STP BPDU will be tunneled.
If the 'gvrp' BIT is set, the GVRP PDU will be tunneled.
If the 'mac-01-00-0C-CC-CC-CC' BIT is set, the PDU with the destination MAC address 01-00-0C-CC-CC-CC will be tunneled .
If the 'mac-01-00-0C-CC-CC-CD' BIT is set, then the PDU with the destination MAC address 01-00-0C-CC-CC-CD will be tunneled.
What is swL2PTProtocol?
This bitmask object selects which specific Layer 2 protocols get tunneled on a UNI port, letting an administrator choose STP BPDUs, GVRP PDUs, and/or frames destined to two specific vendor-reserved multicast MAC addresses independently. It only has effect on ports configured as UNI, since NNI ports simply forward whatever arrives. For example, setting only the 'stp' bit would tunnel spanning-tree BPDUs across the provider network while leaving GVRP traffic to be processed normally at that port.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.171.12.93.1.2.1.3 snmpwalk -v2c -c public <target> L2PROTOCOL-TUNNEL-MIB::swL2PTProtocol
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.171.12.93.1.2.1.3.1 snmpget -v2c -c public <target> L2PROTOCOL-TUNNEL-MIB::swL2PTProtocol.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.171.12.93.1.2.1.3.1 s <value>
Start monitoring D-Link managed switch (Layer 2 Protocol Tunneling) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the L2PROTOCOL-TUNNEL-MIB::swL2PTProtocol OID value, configure state conditions and alerts, and monitor any D-Link managed switch (Layer 2 Protocol Tunneling) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.171 | d_link | DE1500-MIB |
| 1.3.6.1.4.1.171.12 | dlink_common_mgmt | DLINK-ID-REC-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.171.12.93 | swL2ProtocolTunnelMIB | L2PROTOCOL-TUNNEL-MIB |
| 1.3.6.1.4.1.171.12.93.1 | swL2PTMIBObjects | L2PROTOCOL-TUNNEL-MIB |
| 1.3.6.1.4.1.171.12.93.1.2 | swL2PTPortTable | L2PROTOCOL-TUNNEL-MIB |
| 1.3.6.1.4.1.171.12.93.1.2.1 | swL2PTPortEntry | L2PROTOCOL-TUNNEL-MIB |
| 1.3.6.1.4.1.171.12.93.1.2.1.3 | swL2PTProtocol | L2PROTOCOL-TUNNEL-MIB |