JWAC-MIB :: swJWACSwitchHttpPortNumber

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsJWAC-MIBswJWACSwitchHttpPortNumber

swJWACSwitchHttpPortNumber

Module: JWAC-MIB

OID (symbolic): JWAC-MIB::swJWACSwitchHttpPortNumber

OID (numeric): 1.3.6.1.4.1.171.12.39.1.11

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-write

Description: Specifies the TCP port which the JWAC Switch listens to and uses to finish the authenticating process.

What is swJWACSwitchHttpPortNumber?

This sets the TCP port number (1-65535) that the switch listens on to serve its own built-in JWAC authentication page. Admins would change this if the default port conflicts with another service or a specific port is required by policy.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.171.12.39.1.11
snmpwalk -v2c -c public <target> JWAC-MIB::swJWACSwitchHttpPortNumber

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.171.12.39.1.11.1
snmpget -v2c -c public <target> JWAC-MIB::swJWACSwitchHttpPortNumber.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.171.12.39.1.11.1 i <value>

Start monitoring D-Link managed switch (JWAC captive-portal authentication) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the JWAC-MIB::swJWACSwitchHttpPortNumber OID value, configure state conditions and alerts, and monitor any D-Link managed switch (JWAC captive-portal authentication) from a single console.

OID Breakdown

Upper-level ancestors (8 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.171d_linkDE1500-MIB
1.3.6.1.4.1.171.12dlink_common_mgmtDLINK-ID-REC-MIB
Numeric OIDNameModule
1.3.6.1.4.1.171.12.39swJWACMIBJWAC-MIB
1.3.6.1.4.1.171.12.39.1swJWACCtrlJWAC-MIB
1.3.6.1.4.1.171.12.39.1.11swJWACSwitchHttpPortNumberJWAC-MIB