All MIBs › JWAC-MIB › swJWACRadiusProtocol
swJWACRadiusProtocol
Module: JWAC-MIB
OID (symbolic): JWAC-MIB::swJWACRadiusProtocol
OID (numeric): 1.3.6.1.4.1.171.12.39.1.13
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: Specifies the RADIUS protocol used by JWAC to complete a RADIUS authentication.
What is swJWACRadiusProtocol?
This selects which authentication protocol JWAC uses when talking to a RADIUS server: local (no RADIUS), pap, chap, ms_chap, ms_chapv2, or eap_md5. Admins must match this to whatever the RADIUS server itself is configured to accept.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.171.12.39.1.13 snmpwalk -v2c -c public <target> JWAC-MIB::swJWACRadiusProtocol
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.171.12.39.1.13.1 snmpget -v2c -c public <target> JWAC-MIB::swJWACRadiusProtocol.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.171.12.39.1.13.1 i <value>
Start monitoring D-Link managed switch (JWAC captive-portal authentication) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the JWAC-MIB::swJWACRadiusProtocol OID value, configure state conditions and alerts, and monitor any D-Link managed switch (JWAC captive-portal authentication) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.171 | d_link | DE1500-MIB |
| 1.3.6.1.4.1.171.12 | dlink_common_mgmt | DLINK-ID-REC-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.171.12.39 | swJWACMIB | JWAC-MIB |
| 1.3.6.1.4.1.171.12.39.1 | swJWACCtrl | JWAC-MIB |
| 1.3.6.1.4.1.171.12.39.1.13 | swJWACRadiusProtocol | JWAC-MIB |