All MIBs › JUNIPER-LSYSSP-NATSRCRULE-MIB › jnxLsysSpNATsrcruleUsedAmount
jnxLsysSpNATsrcruleUsedAmount
Module: JUNIPER-LSYSSP-NATSRCRULE-MIB
OID (symbolic): JUNIPER-LSYSSP-NATSRCRULE-MIB::jnxLsysSpNATsrcruleUsedAmount
OID (numeric): 1.3.6.1.4.1.2636.3.39.1.17.12.1.2.1
Node type: OBJECT-TYPE
Type: Unsigned32
Access: read-only
Description: The NAT-source-rule resource consumption over all LSYS.
What is jnxLsysSpNATsrcruleUsedAmount?
This object reports the total NAT-source-rule resource consumption summed across all logical systems on the device. Administrators use this device-wide figure to gauge overall NAT-source-rule resource pressure rather than looking at any single LSYS in isolation. For example, jnxLsysSpNATsrcruleUsedAmount might report 3200 total NAT-source-rule resources in use across every configured LSYS on the box.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.2636.3.39.1.17.12.1.2.1 snmpwalk -v2c -c public <target> JUNIPER-LSYSSP-NATSRCRULE-MIB::jnxLsysSpNATsrcruleUsedAmount
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.2636.3.39.1.17.12.1.2.1.1 snmpget -v2c -c public <target> JUNIPER-LSYSSP-NATSRCRULE-MIB::jnxLsysSpNATsrcruleUsedAmount.1
Start monitoring Juniper SRX security appliance (logical-system NAT source-rule quota) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the JUNIPER-LSYSSP-NATSRCRULE-MIB::jnxLsysSpNATsrcruleUsedAmount OID value, configure state conditions and alerts, and monitor any Juniper SRX security appliance (logical-system NAT source-rule quota) from a single console.
OID Breakdown
Upper-level ancestors (12 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.2636 | juniperMIB | JUNIPER-SMI |
| 1.3.6.1.4.1.2636.3 | jnxMibs | JUNIPER-SMI |
| 1.3.6.1.4.1.2636.3.39 | jnxJsMibRoot | JUNIPER-SMI |
| 1.3.6.1.4.1.2636.3.39.1 | jnxJsSecurity | JUNIPER-JS-SMI |
| 1.3.6.1.4.1.2636.3.39.1.17 | jnxLsysSecurityProfile | JUNIPER-JS-SMI |
| 1.3.6.1.4.1.2636.3.39.1.17.12 | jnxLsysSpNATsrcrule | JUNIPER-LSYS-SECURITYPROFILE-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.2636.3.39.1.17.12.1 | jnxLsysSpNATsrcruleMIB | JUNIPER-LSYSSP-NATSRCRULE-MIB |
| 1.3.6.1.4.1.2636.3.39.1.17.12.1.2 | jnxLsysSpNATsrcruleSummary | JUNIPER-LSYSSP-NATSRCRULE-MIB |
| 1.3.6.1.4.1.2636.3.39.1.17.12.1.2.1 | jnxLsysSpNATsrcruleUsedAmount | JUNIPER-LSYSSP-NATSRCRULE-MIB |