All MIBs › JUNIPER-LSYSSP-NATSRCRULE-MIB › jnxLsysSpNATsrcruleMaxQuota
jnxLsysSpNATsrcruleMaxQuota
Module: JUNIPER-LSYSSP-NATSRCRULE-MIB
OID (symbolic): JUNIPER-LSYSSP-NATSRCRULE-MIB::jnxLsysSpNATsrcruleMaxQuota
OID (numeric): 1.3.6.1.4.1.2636.3.39.1.17.12.1.2.2
Node type: OBJECT-TYPE
Type: Unsigned32
Access: read-only
Description: The NAT-source-rule resource maximum quota for the whole device for all LSYS.
What is jnxLsysSpNATsrcruleMaxQuota?
This object gives the maximum NAT-source-rule resource quota available for the whole device, shared across all logical systems. Administrators use this device-wide ceiling to plan how NAT-source-rule capacity should be distributed among individual LSYS profiles without over-provisioning the chassis. For example, if jnxLsysSpNATsrcruleMaxQuota reports 10000, that is the hard cap on NAT-source-rule resources the entire device can allocate across all LSYS combined.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.2636.3.39.1.17.12.1.2.2 snmpwalk -v2c -c public <target> JUNIPER-LSYSSP-NATSRCRULE-MIB::jnxLsysSpNATsrcruleMaxQuota
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.2636.3.39.1.17.12.1.2.2.1 snmpget -v2c -c public <target> JUNIPER-LSYSSP-NATSRCRULE-MIB::jnxLsysSpNATsrcruleMaxQuota.1
Start monitoring Juniper SRX security appliance (logical-system NAT source-rule quota) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the JUNIPER-LSYSSP-NATSRCRULE-MIB::jnxLsysSpNATsrcruleMaxQuota OID value, configure state conditions and alerts, and monitor any Juniper SRX security appliance (logical-system NAT source-rule quota) from a single console.
OID Breakdown
Upper-level ancestors (12 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.2636 | juniperMIB | JUNIPER-SMI |
| 1.3.6.1.4.1.2636.3 | jnxMibs | JUNIPER-SMI |
| 1.3.6.1.4.1.2636.3.39 | jnxJsMibRoot | JUNIPER-SMI |
| 1.3.6.1.4.1.2636.3.39.1 | jnxJsSecurity | JUNIPER-JS-SMI |
| 1.3.6.1.4.1.2636.3.39.1.17 | jnxLsysSecurityProfile | JUNIPER-JS-SMI |
| 1.3.6.1.4.1.2636.3.39.1.17.12 | jnxLsysSpNATsrcrule | JUNIPER-LSYS-SECURITYPROFILE-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.2636.3.39.1.17.12.1 | jnxLsysSpNATsrcruleMIB | JUNIPER-LSYSSP-NATSRCRULE-MIB |
| 1.3.6.1.4.1.2636.3.39.1.17.12.1.2 | jnxLsysSpNATsrcruleSummary | JUNIPER-LSYSSP-NATSRCRULE-MIB |
| 1.3.6.1.4.1.2636.3.39.1.17.12.1.2.2 | jnxLsysSpNATsrcruleMaxQuota | JUNIPER-LSYSSP-NATSRCRULE-MIB |