All MIBs › JUNIPER-LSYSSP-NATSRCRULE-MIB › jnxLsysSpNATsrcruleAvailableAmount
jnxLsysSpNATsrcruleAvailableAmount
Module: JUNIPER-LSYSSP-NATSRCRULE-MIB
OID (symbolic): JUNIPER-LSYSSP-NATSRCRULE-MIB::jnxLsysSpNATsrcruleAvailableAmount
OID (numeric): 1.3.6.1.4.1.2636.3.39.1.17.12.1.2.3
Node type: OBJECT-TYPE
Type: Unsigned32
Access: read-only
Description: The NAT-source-rule resource available in the whole device.
What is jnxLsysSpNATsrcruleAvailableAmount?
This object reports how much NAT-source-rule resource capacity remains available across the entire device. Administrators watch this remaining-capacity figure to know how much headroom is left before new NAT source rules on any LSYS would start failing due to exhausted resources. For example, jnxLsysSpNATsrcruleAvailableAmount might show 6800 remaining out of the device's total quota, indicating comfortable headroom for additional LSYS NAT rules.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.2636.3.39.1.17.12.1.2.3 snmpwalk -v2c -c public <target> JUNIPER-LSYSSP-NATSRCRULE-MIB::jnxLsysSpNATsrcruleAvailableAmount
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.2636.3.39.1.17.12.1.2.3.1 snmpget -v2c -c public <target> JUNIPER-LSYSSP-NATSRCRULE-MIB::jnxLsysSpNATsrcruleAvailableAmount.1
Start monitoring Juniper SRX security appliance (logical-system NAT source-rule quota) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the JUNIPER-LSYSSP-NATSRCRULE-MIB::jnxLsysSpNATsrcruleAvailableAmount OID value, configure state conditions and alerts, and monitor any Juniper SRX security appliance (logical-system NAT source-rule quota) from a single console.
OID Breakdown
Upper-level ancestors (12 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.2636 | juniperMIB | JUNIPER-SMI |
| 1.3.6.1.4.1.2636.3 | jnxMibs | JUNIPER-SMI |
| 1.3.6.1.4.1.2636.3.39 | jnxJsMibRoot | JUNIPER-SMI |
| 1.3.6.1.4.1.2636.3.39.1 | jnxJsSecurity | JUNIPER-JS-SMI |
| 1.3.6.1.4.1.2636.3.39.1.17 | jnxLsysSecurityProfile | JUNIPER-JS-SMI |
| 1.3.6.1.4.1.2636.3.39.1.17.12 | jnxLsysSpNATsrcrule | JUNIPER-LSYS-SECURITYPROFILE-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.2636.3.39.1.17.12.1 | jnxLsysSpNATsrcruleMIB | JUNIPER-LSYSSP-NATSRCRULE-MIB |
| 1.3.6.1.4.1.2636.3.39.1.17.12.1.2 | jnxLsysSpNATsrcruleSummary | JUNIPER-LSYSSP-NATSRCRULE-MIB |
| 1.3.6.1.4.1.2636.3.39.1.17.12.1.2.3 | jnxLsysSpNATsrcruleAvailableAmount | JUNIPER-LSYSSP-NATSRCRULE-MIB |