All MIBs › JUNIPER-LSYSSP-NATSRCPOOL-MIB › jnxLsysSpNATsrcpoolUsedAmount
jnxLsysSpNATsrcpoolUsedAmount
Module: JUNIPER-LSYSSP-NATSRCPOOL-MIB
OID (symbolic): JUNIPER-LSYSSP-NATSRCPOOL-MIB::jnxLsysSpNATsrcpoolUsedAmount
OID (numeric): 1.3.6.1.4.1.2636.3.39.1.17.8.1.2.1
Node type: OBJECT-TYPE
Type: Unsigned32
Access: read-only
Description: The NAT-src-pool resource consumption over all LSYS.
What is jnxLsysSpNATsrcpoolUsedAmount?
This Unsigned32 reports the total NAT source-pool resource consumption across all logical systems on the device, as a device-wide summary rather than a per-LSYS figure. An admin monitors it to understand overall NAT-src-pool pressure on the shared physical firewall, independent of which individual tenant is consuming it. For example, a steadily rising used amount across the whole device would prompt an admin to review per-LSYS usage to find which tenant is driving the growth.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.2636.3.39.1.17.8.1.2.1 snmpwalk -v2c -c public <target> JUNIPER-LSYSSP-NATSRCPOOL-MIB::jnxLsysSpNATsrcpoolUsedAmount
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.2636.3.39.1.17.8.1.2.1.1 snmpget -v2c -c public <target> JUNIPER-LSYSSP-NATSRCPOOL-MIB::jnxLsysSpNATsrcpoolUsedAmount.1
Start monitoring Juniper SRX security/firewall appliance (logical-system NAT source-pool quota) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the JUNIPER-LSYSSP-NATSRCPOOL-MIB::jnxLsysSpNATsrcpoolUsedAmount OID value, configure state conditions and alerts, and monitor any Juniper SRX security/firewall appliance (logical-system NAT source-pool quota) from a single console.
OID Breakdown
Upper-level ancestors (12 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.2636 | juniperMIB | JUNIPER-SMI |
| 1.3.6.1.4.1.2636.3 | jnxMibs | JUNIPER-SMI |
| 1.3.6.1.4.1.2636.3.39 | jnxJsMibRoot | JUNIPER-SMI |
| 1.3.6.1.4.1.2636.3.39.1 | jnxJsSecurity | JUNIPER-JS-SMI |
| 1.3.6.1.4.1.2636.3.39.1.17 | jnxLsysSecurityProfile | JUNIPER-JS-SMI |
| 1.3.6.1.4.1.2636.3.39.1.17.8 | jnxLsysSpNATsrcpool | JUNIPER-LSYS-SECURITYPROFILE-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.2636.3.39.1.17.8.1 | jnxLsysSpNATsrcpoolMIB | JUNIPER-LSYSSP-NATSRCPOOL-MIB |
| 1.3.6.1.4.1.2636.3.39.1.17.8.1.2 | jnxLsysSpNATsrcpoolSummary | JUNIPER-LSYSSP-NATSRCPOOL-MIB |
| 1.3.6.1.4.1.2636.3.39.1.17.8.1.2.1 | jnxLsysSpNATsrcpoolUsedAmount | JUNIPER-LSYSSP-NATSRCPOOL-MIB |