All MIBs › JUNIPER-LSYSSP-NATSRCPOOL-MIB › jnxLsysSpNATsrcpoolReserved
jnxLsysSpNATsrcpoolReserved
Module: JUNIPER-LSYSSP-NATSRCPOOL-MIB
OID (symbolic): JUNIPER-LSYSSP-NATSRCPOOL-MIB::jnxLsysSpNATsrcpoolReserved
OID (numeric): 1.3.6.1.4.1.2636.3.39.1.17.8.1.1.1.1.4
Node type: OBJECT-TYPE
Type: Unsigned32
Access: read-only
Description: The reserved resource count for the LSYS.
What is jnxLsysSpNATsrcpoolReserved?
This Unsigned32 reports the NAT source-pool resource count reserved for a given logical system, guaranteeing that amount of capacity regardless of what other logical systems are consuming. An admin reviews it to understand the guaranteed floor of NAT-src-pool resources available to that LSYS even under contention from other tenants. For example, an admin provisioning a new tenant would set expectations based on this reserved amount rather than the device's total available NAT-src-pool capacity.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.2636.3.39.1.17.8.1.1.1.1.4 snmpwalk -v2c -c public <target> JUNIPER-LSYSSP-NATSRCPOOL-MIB::jnxLsysSpNATsrcpoolReserved
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.2636.3.39.1.17.8.1.1.1.1.4.1 snmpget -v2c -c public <target> JUNIPER-LSYSSP-NATSRCPOOL-MIB::jnxLsysSpNATsrcpoolReserved.1
Start monitoring Juniper SRX security/firewall appliance (logical-system NAT source-pool quota) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the JUNIPER-LSYSSP-NATSRCPOOL-MIB::jnxLsysSpNATsrcpoolReserved OID value, configure state conditions and alerts, and monitor any Juniper SRX security/firewall appliance (logical-system NAT source-pool quota) from a single console.
OID Breakdown
Upper-level ancestors (12 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.2636 | juniperMIB | JUNIPER-SMI |
| 1.3.6.1.4.1.2636.3 | jnxMibs | JUNIPER-SMI |
| 1.3.6.1.4.1.2636.3.39 | jnxJsMibRoot | JUNIPER-SMI |
| 1.3.6.1.4.1.2636.3.39.1 | jnxJsSecurity | JUNIPER-JS-SMI |
| 1.3.6.1.4.1.2636.3.39.1.17 | jnxLsysSecurityProfile | JUNIPER-JS-SMI |
| 1.3.6.1.4.1.2636.3.39.1.17.8 | jnxLsysSpNATsrcpool | JUNIPER-LSYS-SECURITYPROFILE-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.2636.3.39.1.17.8.1 | jnxLsysSpNATsrcpoolMIB | JUNIPER-LSYSSP-NATSRCPOOL-MIB |
| 1.3.6.1.4.1.2636.3.39.1.17.8.1.1 | jnxLsysSpNATsrcpoolObjects | JUNIPER-LSYSSP-NATSRCPOOL-MIB |
| 1.3.6.1.4.1.2636.3.39.1.17.8.1.1.1 | jnxLsysSpNATsrcpoolTable | JUNIPER-LSYSSP-NATSRCPOOL-MIB |
| 1.3.6.1.4.1.2636.3.39.1.17.8.1.1.1.1 | jnxLsysSpNATsrcpoolEntry | JUNIPER-LSYSSP-NATSRCPOOL-MIB |
| 1.3.6.1.4.1.2636.3.39.1.17.8.1.1.1.1.4 | jnxLsysSpNATsrcpoolReserved | JUNIPER-LSYSSP-NATSRCPOOL-MIB |