All MIBs › JUNIPER-LSYSSP-NATSRCPATAD-MIB › jnxLsysSpNATsrcpatadHeaviestUsage
jnxLsysSpNATsrcpatadHeaviestUsage
Module: JUNIPER-LSYSSP-NATSRCPATAD-MIB
OID (symbolic): JUNIPER-LSYSSP-NATSRCPATAD-MIB::jnxLsysSpNATsrcpatadHeaviestUsage
OID (numeric): 1.3.6.1.4.1.2636.3.39.1.17.10.1.2.4
Node type: OBJECT-TYPE
Type: Unsigned32
Access: read-only
Description: The most amount of NAT-src-pat-address resource consumed of a LSYS.
What is jnxLsysSpNATsrcpatadHeaviestUsage?
This scalar reports the highest NAT source-PAT-address resource consumption recorded by any single logical system (LSYS) on the device. An admin uses this figure alongside jnxLsysSpNATsrcpatadHeaviestUser to quickly spot which LSYS is putting the most strain on the shared NAT PAT address pool without having to scan the whole per-LSYS table. For example, seeing this value climb close to that LSYS's own maximum quota flags a candidate for a reservation increase.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.2636.3.39.1.17.10.1.2.4 snmpwalk -v2c -c public <target> JUNIPER-LSYSSP-NATSRCPATAD-MIB::jnxLsysSpNATsrcpatadHeaviestUsage
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.2636.3.39.1.17.10.1.2.4.1 snmpget -v2c -c public <target> JUNIPER-LSYSSP-NATSRCPATAD-MIB::jnxLsysSpNATsrcpatadHeaviestUsage.1
Start monitoring Juniper SRX Series security gateway (logical-system NAT PAT source-address quota) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the JUNIPER-LSYSSP-NATSRCPATAD-MIB::jnxLsysSpNATsrcpatadHeaviestUsage OID value, configure state conditions and alerts, and monitor any Juniper SRX Series security gateway (logical-system NAT PAT source-address quota) from a single console.
OID Breakdown
Upper-level ancestors (12 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.2636 | juniperMIB | JUNIPER-SMI |
| 1.3.6.1.4.1.2636.3 | jnxMibs | JUNIPER-SMI |
| 1.3.6.1.4.1.2636.3.39 | jnxJsMibRoot | JUNIPER-SMI |
| 1.3.6.1.4.1.2636.3.39.1 | jnxJsSecurity | JUNIPER-JS-SMI |
| 1.3.6.1.4.1.2636.3.39.1.17 | jnxLsysSecurityProfile | JUNIPER-JS-SMI |
| 1.3.6.1.4.1.2636.3.39.1.17.10 | jnxLsysSpNATsrcpatad | JUNIPER-LSYS-SECURITYPROFILE-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.2636.3.39.1.17.10.1 | jnxLsysSpNATsrcpatadMIB | JUNIPER-LSYSSP-NATSRCPATAD-MIB |
| 1.3.6.1.4.1.2636.3.39.1.17.10.1.2 | jnxLsysSpNATsrcpatadSummary | JUNIPER-LSYSSP-NATSRCPATAD-MIB |
| 1.3.6.1.4.1.2636.3.39.1.17.10.1.2.4 | jnxLsysSpNATsrcpatadHeaviestUsage | JUNIPER-LSYSSP-NATSRCPATAD-MIB |