All MIBs › JUNIPER-LSYSSP-NATCONEBIND-MIB › jnxLsysSpNATconebindUsedAmount
jnxLsysSpNATconebindUsedAmount
Module: JUNIPER-LSYSSP-NATCONEBIND-MIB
OID (symbolic): JUNIPER-LSYSSP-NATCONEBIND-MIB::jnxLsysSpNATconebindUsedAmount
OID (numeric): 1.3.6.1.4.1.2636.3.39.1.17.15.1.2.1
Node type: OBJECT-TYPE
Type: Unsigned32
Access: read-only
Description: The NAT-cone-bind resource consumption over all LSYS.
What is jnxLsysSpNATconebindUsedAmount?
This read-only value reports the total NAT cone-bind resource consumption summed across all logical systems on the device. An admin monitors it as a device-wide gauge of NAT resource pressure, complementing the per-LSYS usage figures found elsewhere in this MIB. For example, an admin planning to add another tenant LSYS would check this total against jnxLsysSpNATconebindMaxQuota to confirm sufficient shared capacity remains.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.2636.3.39.1.17.15.1.2.1 snmpwalk -v2c -c public <target> JUNIPER-LSYSSP-NATCONEBIND-MIB::jnxLsysSpNATconebindUsedAmount
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.2636.3.39.1.17.15.1.2.1.1 snmpget -v2c -c public <target> JUNIPER-LSYSSP-NATCONEBIND-MIB::jnxLsysSpNATconebindUsedAmount.1
Start monitoring Juniper SRX firewall (logical-system NAT cone-binding quota) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the JUNIPER-LSYSSP-NATCONEBIND-MIB::jnxLsysSpNATconebindUsedAmount OID value, configure state conditions and alerts, and monitor any Juniper SRX firewall (logical-system NAT cone-binding quota) from a single console.
OID Breakdown
Upper-level ancestors (12 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.2636 | juniperMIB | JUNIPER-SMI |
| 1.3.6.1.4.1.2636.3 | jnxMibs | JUNIPER-SMI |
| 1.3.6.1.4.1.2636.3.39 | jnxJsMibRoot | JUNIPER-SMI |
| 1.3.6.1.4.1.2636.3.39.1 | jnxJsSecurity | JUNIPER-JS-SMI |
| 1.3.6.1.4.1.2636.3.39.1.17 | jnxLsysSecurityProfile | JUNIPER-JS-SMI |
| 1.3.6.1.4.1.2636.3.39.1.17.15 | jnxLsysSpNATconebind | JUNIPER-LSYS-SECURITYPROFILE-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.2636.3.39.1.17.15.1 | jnxLsysSpNATconebindMIB | JUNIPER-LSYSSP-NATCONEBIND-MIB |
| 1.3.6.1.4.1.2636.3.39.1.17.15.1.2 | jnxLsysSpNATconebindSummary | JUNIPER-LSYSSP-NATCONEBIND-MIB |
| 1.3.6.1.4.1.2636.3.39.1.17.15.1.2.1 | jnxLsysSpNATconebindUsedAmount | JUNIPER-LSYSSP-NATCONEBIND-MIB |