All MIBs › JUNIPER-LSYSSP-NATCONEBIND-MIB › jnxLsysSpNATconebindReserved
jnxLsysSpNATconebindReserved
Module: JUNIPER-LSYSSP-NATCONEBIND-MIB
OID (symbolic): JUNIPER-LSYSSP-NATCONEBIND-MIB::jnxLsysSpNATconebindReserved
OID (numeric): 1.3.6.1.4.1.2636.3.39.1.17.15.1.1.1.1.4
Node type: OBJECT-TYPE
Type: Unsigned32
Access: read-only
Description: The reserved resource count for the LSYS.
What is jnxLsysSpNATconebindReserved?
This read-only value reports the reserved NAT cone-bind resource count for this logical system, resources set aside for it whether or not currently in use. An admin uses it alongside jnxLsysSpNATconebindUsage and jnxLsysSpNATconebindMaximum to understand how much headroom is guaranteed for that LSYS versus already consumed. For example, an admin planning capacity for a new tenant would check this to see how much of the device's total NAT resource pool is already earmarked for existing LSYS instances.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.2636.3.39.1.17.15.1.1.1.1.4 snmpwalk -v2c -c public <target> JUNIPER-LSYSSP-NATCONEBIND-MIB::jnxLsysSpNATconebindReserved
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.2636.3.39.1.17.15.1.1.1.1.4.1 snmpget -v2c -c public <target> JUNIPER-LSYSSP-NATCONEBIND-MIB::jnxLsysSpNATconebindReserved.1
Start monitoring Juniper SRX firewall (logical-system NAT cone-binding quota) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the JUNIPER-LSYSSP-NATCONEBIND-MIB::jnxLsysSpNATconebindReserved OID value, configure state conditions and alerts, and monitor any Juniper SRX firewall (logical-system NAT cone-binding quota) from a single console.
OID Breakdown
Upper-level ancestors (12 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.2636 | juniperMIB | JUNIPER-SMI |
| 1.3.6.1.4.1.2636.3 | jnxMibs | JUNIPER-SMI |
| 1.3.6.1.4.1.2636.3.39 | jnxJsMibRoot | JUNIPER-SMI |
| 1.3.6.1.4.1.2636.3.39.1 | jnxJsSecurity | JUNIPER-JS-SMI |
| 1.3.6.1.4.1.2636.3.39.1.17 | jnxLsysSecurityProfile | JUNIPER-JS-SMI |
| 1.3.6.1.4.1.2636.3.39.1.17.15 | jnxLsysSpNATconebind | JUNIPER-LSYS-SECURITYPROFILE-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.2636.3.39.1.17.15.1 | jnxLsysSpNATconebindMIB | JUNIPER-LSYSSP-NATCONEBIND-MIB |
| 1.3.6.1.4.1.2636.3.39.1.17.15.1.1 | jnxLsysSpNATconebindObjects | JUNIPER-LSYSSP-NATCONEBIND-MIB |
| 1.3.6.1.4.1.2636.3.39.1.17.15.1.1.1 | jnxLsysSpNATconebindTable | JUNIPER-LSYSSP-NATCONEBIND-MIB |
| 1.3.6.1.4.1.2636.3.39.1.17.15.1.1.1.1 | jnxLsysSpNATconebindEntry | JUNIPER-LSYSSP-NATCONEBIND-MIB |
| 1.3.6.1.4.1.2636.3.39.1.17.15.1.1.1.1.4 | jnxLsysSpNATconebindReserved | JUNIPER-LSYSSP-NATCONEBIND-MIB |