All MIBs › JUNIPER-LSYSSP-NATCONEBIND-MIB › jnxLsysSpNATconebindMaxQuota
jnxLsysSpNATconebindMaxQuota
Module: JUNIPER-LSYSSP-NATCONEBIND-MIB
OID (symbolic): JUNIPER-LSYSSP-NATCONEBIND-MIB::jnxLsysSpNATconebindMaxQuota
OID (numeric): 1.3.6.1.4.1.2636.3.39.1.17.15.1.2.2
Node type: OBJECT-TYPE
Type: Unsigned32
Access: read-only
Description: The NAT-cone-bind resource maximum quota for the whole device for all LSYS.
What is jnxLsysSpNATconebindMaxQuota?
This read-only value reports the maximum NAT cone-bind resource quota for the whole device, shared across all logical systems. An admin uses it as the hard ceiling for total NAT cone-bind resources the device can allocate across every tenant LSYS combined. For example, an admin sizing how many tenant LSYS instances a chassis can support would use this device-wide quota as the starting budget to divide up.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.2636.3.39.1.17.15.1.2.2 snmpwalk -v2c -c public <target> JUNIPER-LSYSSP-NATCONEBIND-MIB::jnxLsysSpNATconebindMaxQuota
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.2636.3.39.1.17.15.1.2.2.1 snmpget -v2c -c public <target> JUNIPER-LSYSSP-NATCONEBIND-MIB::jnxLsysSpNATconebindMaxQuota.1
Start monitoring Juniper SRX firewall (logical-system NAT cone-binding quota) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the JUNIPER-LSYSSP-NATCONEBIND-MIB::jnxLsysSpNATconebindMaxQuota OID value, configure state conditions and alerts, and monitor any Juniper SRX firewall (logical-system NAT cone-binding quota) from a single console.
OID Breakdown
Upper-level ancestors (12 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.2636 | juniperMIB | JUNIPER-SMI |
| 1.3.6.1.4.1.2636.3 | jnxMibs | JUNIPER-SMI |
| 1.3.6.1.4.1.2636.3.39 | jnxJsMibRoot | JUNIPER-SMI |
| 1.3.6.1.4.1.2636.3.39.1 | jnxJsSecurity | JUNIPER-JS-SMI |
| 1.3.6.1.4.1.2636.3.39.1.17 | jnxLsysSecurityProfile | JUNIPER-JS-SMI |
| 1.3.6.1.4.1.2636.3.39.1.17.15 | jnxLsysSpNATconebind | JUNIPER-LSYS-SECURITYPROFILE-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.2636.3.39.1.17.15.1 | jnxLsysSpNATconebindMIB | JUNIPER-LSYSSP-NATCONEBIND-MIB |
| 1.3.6.1.4.1.2636.3.39.1.17.15.1.2 | jnxLsysSpNATconebindSummary | JUNIPER-LSYSSP-NATCONEBIND-MIB |
| 1.3.6.1.4.1.2636.3.39.1.17.15.1.2.2 | jnxLsysSpNATconebindMaxQuota | JUNIPER-LSYSSP-NATCONEBIND-MIB |