All MIBs › IPSEC-MIB › ipsecProtSuiteRemoteIdType
ipsecProtSuiteRemoteIdType
Module: IPSEC-MIB
OID (symbolic): IPSEC-MIB::ipsecProtSuiteRemoteIdType
OID (numeric): 1.3.6.1.3.500.1.1.1.1.13
Node type: OBJECT-TYPE
Type: Unsigned32
Access: read-only
Description: The type of identifier presented by 'ipsecTunnelRemoteId', or 0 if unknown or if the protection suite uses transport mode encapsulation.
This value is taken directly from the optional ID payloads that are exchange during phase 2 negotiations.
What is ipsecProtSuiteRemoteIdType?
The type code of the remote identifier reported in ipsecProtSuiteRemoteId, or 0 if unknown or unused.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.3.500.1.1.1.1.13 snmpwalk -v2c -c public <target> IPSEC-MIB::ipsecProtSuiteRemoteIdType
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.3.500.1.1.1.1.13.1 snmpget -v2c -c public <target> IPSEC-MIB::ipsecProtSuiteRemoteIdType.1
Start monitoring Vendor-neutral IETF standard (IPsec-capable router/firewall/VPN gateway) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the IPSEC-MIB::ipsecProtSuiteRemoteIdType OID value, configure state conditions and alerts, and monitor any Vendor-neutral IETF standard (IPsec-capable router/firewall/VPN gateway) from a single console.
OID Breakdown
Upper-level ancestors (5 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.3 | experimental | APERTUS-NPG-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.3.500 | ipsecMIB | IPSEC-MIB |
| 1.3.6.1.3.500.1 | ipsecMIBObjects | IPSEC-MIB |
| 1.3.6.1.3.500.1.1 | ipsec | IPSEC-MIB |
| 1.3.6.1.3.500.1.1.1 | ipsecProtSuiteTable | IPSEC-MIB |
| 1.3.6.1.3.500.1.1.1.1 | ipsecProtSuiteEntry | IPSEC-MIB |
| 1.3.6.1.3.500.1.1.1.1.13 | ipsecProtSuiteRemoteIdType | IPSEC-MIB |