All MIBs › IPSEC-MIB › ipsecProtSuiteOutboundEspSpi
ipsecProtSuiteOutboundEspSpi
Module: IPSEC-MIB
OID (symbolic): IPSEC-MIB::ipsecProtSuiteOutboundEspSpi
OID (numeric): 1.3.6.1.3.500.1.1.1.1.5
Node type: OBJECT-TYPE
Type: Unsigned32
Access: read-only
Description: The value of the SPI for the outbound protection suite that provides the ESP security service, or zero if ESP is not used.
What is ipsecProtSuiteOutboundEspSpi?
The Security Parameter Index used for outbound ESP traffic on this protection suite, or zero if ESP is not used; this is the SPI value the peer will see and use to identify inbound packets from this device.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.3.500.1.1.1.1.5 snmpwalk -v2c -c public <target> IPSEC-MIB::ipsecProtSuiteOutboundEspSpi
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.3.500.1.1.1.1.5.1 snmpget -v2c -c public <target> IPSEC-MIB::ipsecProtSuiteOutboundEspSpi.1
Start monitoring Vendor-neutral IETF standard (IPsec-capable router/firewall/VPN gateway) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the IPSEC-MIB::ipsecProtSuiteOutboundEspSpi OID value, configure state conditions and alerts, and monitor any Vendor-neutral IETF standard (IPsec-capable router/firewall/VPN gateway) from a single console.
OID Breakdown
Upper-level ancestors (5 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.3 | experimental | APERTUS-NPG-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.3.500 | ipsecMIB | IPSEC-MIB |
| 1.3.6.1.3.500.1 | ipsecMIBObjects | IPSEC-MIB |
| 1.3.6.1.3.500.1.1 | ipsec | IPSEC-MIB |
| 1.3.6.1.3.500.1.1.1 | ipsecProtSuiteTable | IPSEC-MIB |
| 1.3.6.1.3.500.1.1.1.1 | ipsecProtSuiteEntry | IPSEC-MIB |
| 1.3.6.1.3.500.1.1.1.1.5 | ipsecProtSuiteOutboundEspSpi | IPSEC-MIB |