Description: A device specific description of the last error encountered for output bin 1. Each POS should document the meaning of all supported error information. Additional information: This is a description of the current error state of a finishing device. (ie stapler). If the bin does not support any finishing capabilities then the object will return . The possible return values are as follows: Byte1, Byte2, and Byte3 should be 0x00. as they are reserved for future use. Byte4 is a bit field that can be interpreted as follows: bit 0 - unused bit 1 - eBinderOut Out of staples bit 2 - eBinderLimit Too many pages to finish bit 3 - eBinderJam Staple jammed in stapler bit 4 - eBinderAlign Pages aren't aligned correctly to finish. bit 5 - unused bit 6 - unused bit 7 - unused NOTE: Because HP is marketing a device with a max of 16 bins the OUTBIN-MAXIMUM-BINDING objects are 3-18 but the external device specification requires support of up to 315 output bins. Therefore if these bins exist above 16, then the coresponding objects will also exist OUTBIN19-MAXIMUM-BINDING ... OUTBIN317-MAXIMUM-BINDING