HUAWEI-VO-IF-MIB :: hwVoIfConfigCallingNumSubstRule

MIB Reference — IPNetwork Monitor · Updated October 05, 2026

All MIBs › HUAWEI-VO-IF-MIB › hwVoIfConfigCallingNumSubstRule

hwVoIfConfigCallingNumSubstRule

Module: HUAWEI-VO-IF-MIB

OID (symbolic): HUAWEI-VO-IF-MIB::hwVoIfConfigCallingNumSubstRule

OID (numeric): 1.3.6.1.4.1.2011.5.25.1.2.1.1.1.16

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-write

Description: This object specifies a number-substitute rule that apply calling numbor this subscriber line. It is valid if its value is between 1 and 21474836This subscriber line doesn't apply any number-substitute rule if its value is 0.

What is hwVoIfConfigCallingNumSubstRule?

This value specifies which number-substitution rule, identified by an ID from 1 to 2147483647, is applied to the calling number on this subscriber line, with 0 meaning no substitution rule is applied. An admin uses it to make outbound caller ID present a different number than the line's actual number, for example normalizing internal extensions to a public DID. For example, setting hwVoIfConfigCallingNumSubstRule to rule ID 5 would apply substitution rule 5 to rewrite the calling number presented for calls placed from this line.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.2011.5.25.1.2.1.1.1.16
snmpwalk -v2c -c public <target> HUAWEI-VO-IF-MIB::hwVoIfConfigCallingNumSubstRule

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.2011.5.25.1.2.1.1.1.16.1
snmpget -v2c -c public <target> HUAWEI-VO-IF-MIB::hwVoIfConfigCallingNumSubstRule.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.2011.5.25.1.2.1.1.1.16.1 i <value>

SNMPv3 example:

snmpget -v3 -l authPriv -u snmpv3-user -a SHA -A "AuthPassword1" -x AES -X "PrivPassword1" <target> hwVoIfConfigCallingNumSubstRule.1

Start monitoring Huawei voice gateway/access device (voice interface to dial-peer binding) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the HUAWEI-VO-IF-MIB::hwVoIfConfigCallingNumSubstRule OID value, configure state conditions and alerts, and monitor any Huawei voice gateway/access device (voice interface to dial-peer binding) from a single console.

OID Breakdown

Upper-level ancestors (11 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.2011huaweiEXPERTV2-MIB
1.3.6.1.4.1.2011.5huaweiMgmtHUAWEI-3COM-OID-MIB
1.3.6.1.4.1.2011.5.25huaweiDatacommHUAWEI-3COM-OID-MIB
1.3.6.1.4.1.2011.5.25.1voiceHUAWEI-3COM-OID-MIB
1.3.6.1.4.1.2011.5.25.1.2hwVoiceIfMIBHUAWEI-3COM-OID-MIB
Numeric OIDNameModule
1.3.6.1.4.1.2011.5.25.1.2.1hwVoIfObjectsHUAWEI-VO-IF-MIB
1.3.6.1.4.1.2011.5.25.1.2.1.1hwVoIfConfigTableHUAWEI-VO-IF-MIB
1.3.6.1.4.1.2011.5.25.1.2.1.1.1hwVoIfConfigEntryHUAWEI-VO-IF-MIB
1.3.6.1.4.1.2011.5.25.1.2.1.1.1.16hwVoIfConfigCallingNumSubstRuleHUAWEI-VO-IF-MIB