HUAWEI-VO-IF-MIB :: hwVoIfConfigCalledNumSubstRule

MIB Reference — IPNetwork Monitor · Updated October 05, 2026

All MIBs › HUAWEI-VO-IF-MIB › hwVoIfConfigCalledNumSubstRule

hwVoIfConfigCalledNumSubstRule

Module: HUAWEI-VO-IF-MIB

OID (symbolic): HUAWEI-VO-IF-MIB::hwVoIfConfigCalledNumSubstRule

OID (numeric): 1.3.6.1.4.1.2011.5.25.1.2.1.1.1.17

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-write

Description: This object specifies a number-substitute rule that apply called number for this subscriber line. It is valid if its value is between 1 and 2147483647. This subscriber line doesn't apply any number-substitute rule if its value is 0.

What is hwVoIfConfigCalledNumSubstRule?

This value specifies which number-substitution rule, identified by an ID from 1 to 2147483647, is applied to the called number dialed on this subscriber line, with 0 meaning no substitution rule is applied. An admin uses it to rewrite the dialed digits before call routing, such as stripping or adding prefixes for outbound trunk access. For example, setting hwVoIfConfigCalledNumSubstRule to rule ID 2 could strip a leading "9" trunk-access digit before the call is routed onward.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.2011.5.25.1.2.1.1.1.17
snmpwalk -v2c -c public <target> HUAWEI-VO-IF-MIB::hwVoIfConfigCalledNumSubstRule

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.2011.5.25.1.2.1.1.1.17.1
snmpget -v2c -c public <target> HUAWEI-VO-IF-MIB::hwVoIfConfigCalledNumSubstRule.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.2011.5.25.1.2.1.1.1.17.1 i <value>

Start monitoring Huawei voice gateway/access device (voice interface to dial-peer binding) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the HUAWEI-VO-IF-MIB::hwVoIfConfigCalledNumSubstRule OID value, configure state conditions and alerts, and monitor any Huawei voice gateway/access device (voice interface to dial-peer binding) from a single console.

OID Breakdown

Upper-level ancestors (11 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.2011huaweiEXPERTV2-MIB
1.3.6.1.4.1.2011.5huaweiMgmtHUAWEI-3COM-OID-MIB
1.3.6.1.4.1.2011.5.25huaweiDatacommHUAWEI-3COM-OID-MIB
1.3.6.1.4.1.2011.5.25.1voiceHUAWEI-3COM-OID-MIB
1.3.6.1.4.1.2011.5.25.1.2hwVoiceIfMIBHUAWEI-3COM-OID-MIB
Numeric OIDNameModule
1.3.6.1.4.1.2011.5.25.1.2.1hwVoIfObjectsHUAWEI-VO-IF-MIB
1.3.6.1.4.1.2011.5.25.1.2.1.1hwVoIfConfigTableHUAWEI-VO-IF-MIB
1.3.6.1.4.1.2011.5.25.1.2.1.1.1hwVoIfConfigEntryHUAWEI-VO-IF-MIB
1.3.6.1.4.1.2011.5.25.1.2.1.1.1.17hwVoIfConfigCalledNumSubstRuleHUAWEI-VO-IF-MIB