All MIBs › HUAWEI-VLAN-MIB › hwIPv6MTU
hwIPv6MTU
Module: HUAWEI-VLAN-MIB
OID (symbolic): HUAWEI-VLAN-MIB::hwIPv6MTU
OID (numeric): 1.3.6.1.4.1.2011.5.6.1.2.1.14
Node type: OBJECT-TYPE
Type: Integer32
Access: read-write
Description:
Used to configure the maximum transmission unit of vlanif.If you set it on one vlanif,all the vlanif will be configured. For P300 device, the node can take effect on IPV4 and IPV6. For Saturn device, it only takes effect on IPV6. Range: -1,1280-1499,1501-1560. For P300 device, the range is -1,1501-1560. For Saturn device, the range is -1,1280-1499,1501-1560. Deafult:-1,this value means the MTU of vlanif is the default value(for example: 1500).
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.2011.5.6.1.2.1.14 snmpwalk -v2c -c public <target> HUAWEI-VLAN-MIB::hwIPv6MTU
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.2011.5.6.1.2.1.14.1 snmpget -v2c -c public <target> HUAWEI-VLAN-MIB::hwIPv6MTU.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.2011.5.6.1.2.1.14.1 i <value>
OID Breakdown
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | BIANCA-BRICK-PPP-MIB |
| 1.3.6 | dod | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1 | internet | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4 | private | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4.1 | enterprises | ANIROOT-MIB |
| 1.3.6.1.4.1.2011 | huawei | HUAWEI-3COM-OID-MIB |
| 1.3.6.1.4.1.2011.5 | huaweiMgmt | HUAWEI-3COM-OID-MIB |
| 1.3.6.1.4.1.2011.5.6 | hwVlan | HUAWEI-MIB |
| 1.3.6.1.4.1.2011.5.6.1 | hwVlanMngObject | HUAWEI-VLAN-IF-MIB |
| 1.3.6.1.4.1.2011.5.6.1.2 | hwVlanInterfaceTable | HUAWEI-VLAN-IF-MIB |
| 1.3.6.1.4.1.2011.5.6.1.2.1 | hwVlanInterfaceEntry | HUAWEI-VLAN-IF-MIB |
| 1.3.6.1.4.1.2011.5.6.1.2.1.14 | hwIPv6MTU | HUAWEI-VLAN-MIB |