All MIBs › HUAWEI-IPDSLAM-L3PROTOCOL-MIB › hwRsvpTeDot1pPriority
hwRsvpTeDot1pPriority
Module: HUAWEI-IPDSLAM-L3PROTOCOL-MIB
OID (symbolic): HUAWEI-IPDSLAM-L3PROTOCOL-MIB::hwRsvpTeDot1pPriority
OID (numeric): 1.3.6.1.4.1.2011.6.125.1.1.1.1.4
Node type: OBJECT-TYPE
Type: Integer32
Access: read-write
Description: The 802.1p priority of RSVP-TE protocol on this VLAN.
What is hwRsvpTeDot1pPriority?
This read-write Integer32 (0..7), defaulting to 0, sets the IEEE 802.1p priority tag applied to RSVP-TE control-plane traffic on this VLAN. An admin raises this to protect MPLS traffic-engineering signaling (path setup/teardown messages) from congestion-related loss or delay. Setting it to 6 would give RSVP-TE packets on this VLAN high forwarding priority, helping preserve TE tunnel signaling reliability.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.2011.6.125.1.1.1.1.4 snmpwalk -v2c -c public <target> HUAWEI-IPDSLAM-L3PROTOCOL-MIB::hwRsvpTeDot1pPriority
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.2011.6.125.1.1.1.1.4.1 snmpget -v2c -c public <target> HUAWEI-IPDSLAM-L3PROTOCOL-MIB::hwRsvpTeDot1pPriority.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.2011.6.125.1.1.1.1.4.1 i <value>
Start monitoring Huawei IP-DSLAM (per-VLAN 802.1p protocol-packet priority) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the HUAWEI-IPDSLAM-L3PROTOCOL-MIB::hwRsvpTeDot1pPriority OID value, configure state conditions and alerts, and monitor any Huawei IP-DSLAM (per-VLAN 802.1p protocol-packet priority) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.2011 | huawei | EXPERTV2-MIB |
| 1.3.6.1.4.1.2011.6 | huaweiUtility | HUAWEI-3COM-OID-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.2011.6.125 | hwL3Protocol | HUAWEI-IPDSLAM-L3PROTOCOL-MIB |
| 1.3.6.1.4.1.2011.6.125.1 | hwL3ProtocolMibObject | HUAWEI-IPDSLAM-L3PROTOCOL-MIB |
| 1.3.6.1.4.1.2011.6.125.1.1 | hwProtocolDot1p | HUAWEI-IPDSLAM-L3PROTOCOL-MIB |
| 1.3.6.1.4.1.2011.6.125.1.1.1 | hwProtocolDot1pTable | HUAWEI-IPDSLAM-L3PROTOCOL-MIB |
| 1.3.6.1.4.1.2011.6.125.1.1.1.1 | hwProtocolDot1pEntry | HUAWEI-IPDSLAM-L3PROTOCOL-MIB |
| 1.3.6.1.4.1.2011.6.125.1.1.1.1.4 | hwRsvpTeDot1pPriority | HUAWEI-IPDSLAM-L3PROTOCOL-MIB |