All MIBs › HUAWEI-IPDSLAM-L3PROTOCOL-MIB › hwProtocolDot1pPriority
hwProtocolDot1pPriority
Module: HUAWEI-IPDSLAM-L3PROTOCOL-MIB
OID (symbolic): HUAWEI-IPDSLAM-L3PROTOCOL-MIB::hwProtocolDot1pPriority
OID (numeric): 1.3.6.1.4.1.2011.6.125.1.1.1.1.6
Node type: OBJECT-TYPE
Type: Integer32
Access: read-write
Description: Indicates the VLAN-based 802.1p priority of packet. Range: -1 - 7 The larger the value, the higher the priority. The invalid value -1 is returned when this leaf is not specified. The meaning of each value is as follows: best-effort: Best-effort priority(0) background: Background priority(1) spare: Spare priority(2) excellent-effort: Excellent-effort priority(3) controlled-load: Controlled-load priority(4) video: Video priority(5) voice: Voice priority(6) network-management: Network-management priority(7)
What is hwProtocolDot1pPriority?
This read-write Integer32 (-1..7), defaulting to -1 (not specified), sets a VLAN-based 802.1p priority where higher numbers mean higher priority, following the standard priority names from best-effort(0) up to network-management(7). An admin sets this as a general per-VLAN 802.1p marking, distinct from the protocol-specific priority objects, to classify traffic on that VLAN when no more specific rule applies. Setting it to 6 (voice priority) would mark general traffic on this VLAN for voice-level forwarding priority.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.2011.6.125.1.1.1.1.6 snmpwalk -v2c -c public <target> HUAWEI-IPDSLAM-L3PROTOCOL-MIB::hwProtocolDot1pPriority
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.2011.6.125.1.1.1.1.6.1 snmpget -v2c -c public <target> HUAWEI-IPDSLAM-L3PROTOCOL-MIB::hwProtocolDot1pPriority.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.2011.6.125.1.1.1.1.6.1 i <value>
Start monitoring Huawei IP-DSLAM (per-VLAN 802.1p protocol-packet priority) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the HUAWEI-IPDSLAM-L3PROTOCOL-MIB::hwProtocolDot1pPriority OID value, configure state conditions and alerts, and monitor any Huawei IP-DSLAM (per-VLAN 802.1p protocol-packet priority) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.2011 | huawei | EXPERTV2-MIB |
| 1.3.6.1.4.1.2011.6 | huaweiUtility | HUAWEI-3COM-OID-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.2011.6.125 | hwL3Protocol | HUAWEI-IPDSLAM-L3PROTOCOL-MIB |
| 1.3.6.1.4.1.2011.6.125.1 | hwL3ProtocolMibObject | HUAWEI-IPDSLAM-L3PROTOCOL-MIB |
| 1.3.6.1.4.1.2011.6.125.1.1 | hwProtocolDot1p | HUAWEI-IPDSLAM-L3PROTOCOL-MIB |
| 1.3.6.1.4.1.2011.6.125.1.1.1 | hwProtocolDot1pTable | HUAWEI-IPDSLAM-L3PROTOCOL-MIB |
| 1.3.6.1.4.1.2011.6.125.1.1.1.1 | hwProtocolDot1pEntry | HUAWEI-IPDSLAM-L3PROTOCOL-MIB |
| 1.3.6.1.4.1.2011.6.125.1.1.1.1.6 | hwProtocolDot1pPriority | HUAWEI-IPDSLAM-L3PROTOCOL-MIB |