All MIBs › HUAWEI-IPDSLAM-L2PPORTCONFIG-MIB › hwIpDslamL2pVlanCtrlPppoeMacMode
hwIpDslamL2pVlanCtrlPppoeMacMode
Module: HUAWEI-IPDSLAM-L2PPORTCONFIG-MIB
OID (symbolic): HUAWEI-IPDSLAM-L2PPORTCONFIG-MIB::hwIpDslamL2pVlanCtrlPppoeMacMode
OID (numeric): 1.3.6.1.4.1.2011.6.109.3.1.3
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: Indicates the MAC address mode of a PPPoE user. Options: 1. multiMac(1) 2. singleMac(2) Default: multiMac(1)
What is hwIpDslamL2pVlanCtrlPppoeMacMode?
This read-write value sets whether PPPoE users on this VLAN are allowed multiple MAC addresses (multiMac) or restricted to a single MAC address (singleMac) per session, defaulting to multiMac. An admin restricts this to singleMac on VLANs where each PPPoE subscriber should be tied to exactly one device's MAC address, tightening access control. For example, setting this object to singleMac(2) would reject a second device attempting to establish a PPPoE session using a different MAC address on the same VLAN circuit.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.2011.6.109.3.1.3 snmpwalk -v2c -c public <target> HUAWEI-IPDSLAM-L2PPORTCONFIG-MIB::hwIpDslamL2pVlanCtrlPppoeMacMode
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.2011.6.109.3.1.3.1 snmpget -v2c -c public <target> HUAWEI-IPDSLAM-L2PPORTCONFIG-MIB::hwIpDslamL2pVlanCtrlPppoeMacMode.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.2011.6.109.3.1.3.1 i <value>
Start monitoring Huawei IP-DSLAM broadband access platform (Layer 2 port/service config) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the HUAWEI-IPDSLAM-L2PPORTCONFIG-MIB::hwIpDslamL2pVlanCtrlPppoeMacMode OID value, configure state conditions and alerts, and monitor any Huawei IP-DSLAM broadband access platform (Layer 2 port/service config) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.2011 | huawei | EXPERTV2-MIB |
| 1.3.6.1.4.1.2011.6 | huaweiUtility | HUAWEI-3COM-OID-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.2011.6.109 | hwIpDslamL2pPortConfig | HUAWEI-IPDSLAM-L2PPORTCONFIG-MIB |
| 1.3.6.1.4.1.2011.6.109.3 | hwIpDslamL2pVlanCtrlTable | HUAWEI-IPDSLAM-L2PPORTCONFIG-MIB |
| 1.3.6.1.4.1.2011.6.109.3.1 | hwIpDslamL2pVlanCtrlEntry | HUAWEI-IPDSLAM-L2PPORTCONFIG-MIB |
| 1.3.6.1.4.1.2011.6.109.3.1.3 | hwIpDslamL2pVlanCtrlPppoeMacMode | HUAWEI-IPDSLAM-L2PPORTCONFIG-MIB |