All MIBs › HUAWEI-IPDSLAM-L2PPORTCONFIG-MIB › hwIpDslamL2pPortConfigValue
hwIpDslamL2pPortConfigValue
Module: HUAWEI-IPDSLAM-L2PPORTCONFIG-MIB
OID (symbolic): HUAWEI-IPDSLAM-L2PPORTCONFIG-MIB::hwIpDslamL2pPortConfigValue
OID (numeric): 1.3.6.1.4.1.2011.6.109.1.1.6
Node type: OBJECT-TYPE
Type: DisplayString
Access: read-write
Description: Indicates the value of the configured object. Because some configured objects must be of the integer type while others may be of the character string type, the values of the configured objects must be input as a character string when the objects are configured through this leaf. The length of the character string is 0-255 characters. When hwIpDslamL2pPortConfigObject is set to pppoeSessionCount(1), the input range is (1..8) and the default value is 8. When hwIpDslamL2pPortConfigObject is set to pitp(2), the input range is (1..2), where 1 indicates enabled and 2 indicates disabled. The default value is 1. When hwIpDslamL2pPortConfigObject is set to dhcpOption82(3), the input range is (1..2), where 1 indicates enabled and 2 indicates disabled. The default value is 1.
What is hwIpDslamL2pPortConfigValue?
This read-write string carries the actual value of a configured per-port object, entered as text even for objects that are logically integers, such as PPPoE session count (range 1 to 8, default 8), PITP status, or DHCP Option 82 status (each 1 for enabled or 2 for disabled, default 1). An admin sets this to the specific value appropriate to whichever configured object is targeted, consulting the per-object ranges documented in the MIB since valid input differs by object. For example, setting this object to "1" while the associated configured object is dhcpOption82(3) enables DHCP Option 82 insertion on that port.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.2011.6.109.1.1.6 snmpwalk -v2c -c public <target> HUAWEI-IPDSLAM-L2PPORTCONFIG-MIB::hwIpDslamL2pPortConfigValue
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.2011.6.109.1.1.6.1 snmpget -v2c -c public <target> HUAWEI-IPDSLAM-L2PPORTCONFIG-MIB::hwIpDslamL2pPortConfigValue.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.2011.6.109.1.1.6.1 s <value>
Start monitoring Huawei IP-DSLAM broadband access platform (Layer 2 port/service config) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the HUAWEI-IPDSLAM-L2PPORTCONFIG-MIB::hwIpDslamL2pPortConfigValue OID value, configure state conditions and alerts, and monitor any Huawei IP-DSLAM broadband access platform (Layer 2 port/service config) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.2011 | huawei | EXPERTV2-MIB |
| 1.3.6.1.4.1.2011.6 | huaweiUtility | HUAWEI-3COM-OID-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.2011.6.109 | hwIpDslamL2pPortConfig | HUAWEI-IPDSLAM-L2PPORTCONFIG-MIB |
| 1.3.6.1.4.1.2011.6.109.1 | hwIpDslamL2pPortConfigTable | HUAWEI-IPDSLAM-L2PPORTCONFIG-MIB |
| 1.3.6.1.4.1.2011.6.109.1.1 | hwIpDslamL2pPortConfigEntry | HUAWEI-IPDSLAM-L2PPORTCONFIG-MIB |
| 1.3.6.1.4.1.2011.6.109.1.1.6 | hwIpDslamL2pPortConfigValue | HUAWEI-IPDSLAM-L2PPORTCONFIG-MIB |