All MIBs › H3C-NAT-MIB › h3cNATBLConSpd
h3cNATBLConSpd
Module: H3C-NAT-MIB
OID (symbolic): H3C-NAT-MIB::h3cNATBLConSpd
OID (numeric): 1.3.6.1.4.1.2011.10.2.18.2.7.1.4
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-only
Description: The state of connection rate: red(1) : the connection rate is above the upper limit. yellow(2): the connection rate is between the upper and lower limit. green(3) : the conneciton rate is below the lower limit.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.2011.10.2.18.2.7.1.4 snmpwalk -v2c -c public <target> H3C-NAT-MIB::h3cNATBLConSpd
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.2011.10.2.18.2.7.1.4.1 snmpget -v2c -c public <target> H3C-NAT-MIB::h3cNATBLConSpd.1
Start monitoring H3C router/gateway (Network Address Translation) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the H3C-NAT-MIB::h3cNATBLConSpd OID value, configure state conditions and alerts, and monitor any H3C router/gateway (Network Address Translation) from a single console.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.2011 | huawei | EXPERTV2-MIB |
| 1.3.6.1.4.1.2011.10 | h3c | HUAWEI-3COM-OID-MIB |
| 1.3.6.1.4.1.2011.10.2 | h3cCommon | HUAWEI-3COM-OID-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.2011.10.2.18 | h3cNat | H3C-NAT-MIB |
| 1.3.6.1.4.1.2011.10.2.18.2 | h3cNATMibObjects | H3C-NAT-MIB |
| 1.3.6.1.4.1.2011.10.2.18.2.7 | h3cNATBLManagerTable | H3C-NAT-MIB |
| 1.3.6.1.4.1.2011.10.2.18.2.7.1 | h3cNATBLManagerEntry | H3C-NAT-MIB |
| 1.3.6.1.4.1.2011.10.2.18.2.7.1.4 | h3cNATBLConSpd | H3C-NAT-MIB |